Contact

Call Now
Omniflex Spiral Section
Omniflex Spiral Section

1.0:1 Turn Ratio. Small Radius Omni-Flex® conveyor belts can negotiate a much tighter turn than regular Omni-Flex belts. 

Small Radius Omni-Flex®

In general, the inside radius can be equal to the belt width, making Small Radius Omni-Flex ideal for use in applications where floor space is limited. Small Radius Omni-Flex can turn either left or right (only), pivoting about a center link.

Small Radius Omni-Flex®

Select another product option

Features

Specifications

Options

Downloads

Features

Superior Strength & Load Capacity for High Speed, High Tension Spiral and Turn-Curve Applications

Superior Strength & Load Capacity for High Speed, High Tension Spiral and Turn-Curve Applications

Ashworth Omni-Flex® belts are the original turn-curve conveyor belts and have been delivering reliable performance since 1959.

These flat wire belts are constructed with heavy duty, precision formed rod ends for extended cage life and button heads for maximum strength and reduced wear. Unlike straight-running flat wire belts, Omni-Flex® belts are constructed with slots instead of holes. The slotted design allows the belt to collapse on either side, for both left-hand and right-hand turns.

Stainless Steel, Heavy Duty Construction

All Omni-Flex® components are precision crafted from premium quality stainless steel to exacting standards. The finish is smooth and burr-free for easy clean-up and excellent sanitary properties. Two rows of reinforcing bar links are standard to provide strength.

Broad Range of Sizes & Accessories

Available flat wire mesh dimensions for Omni-Flex® belts include 1" x 1", 1/2" x 1" and 1/3" x 1". Ashworth patented fatigue-resistant pickets are available on most Omni-Flex® belts and increase belt service life by about 30%. Other accessories such as guard edges, reinforcing bar links, and lane dividers are available for special needs.

DIRECTION

spiral

SPIRAL

Multi-directional

MULTI

turn-curve

TURN-CURVE

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

REQUEST A QUOTE

Specifications

Technical Specifications

Select another product option

Technical Specifications Units Small Radius Omni-Flex G1
Turn Ratio 1.0 - 1.7
Pitch: Inside in. [mm] 1.084 [27.53]
Pitch: Outside in. [mm] 1.500 [38.10]
Available Widths: Curve in. [mm] 14-54 [356-1372]
Available Widths: Straight in. [mm] 14-54 [356-1372]
Picket Dimension: Inside in. [mm] 0.50 x 0.06 [12.7 x 1.6]
Picket Dimension: Outside in. [mm] 0.50 x 0.05 [12.7 x1.2]
Nominal Opening Size in. 1x1 By 1x1-1/2
Rod Diameter/Material in. [mm] 0.192 [4.88] / Metal
Conveying Surface in. [mm] Belt Width -0.25
Thickness in. [mm] 0.5 [13]
Allowable Tension: Curve lb. [kg] 300 [136]
Allowable Tension: Straight lb. [kg] 600 [272]
Turn Direction Uni-directional (left or right-must specify direction)
Mode of Turning Inside edge collapses in turn
Mode of Drive Positively driven with precision sprockets

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-9 Hardened Steel 9 0 2.45 (62.23) 1 (25.4) 1.83 (46.48)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1.25 (31.75) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 0.94 (23.81) 1.84 (46.74)
3 #3-9 T316 9 3.16 (80.26) 2.46 (62.48) 1.44 (36.51) 1.84 (46.74)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 1 (25.4) 1.72 (43.69)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 0 1.72 (43.69)
4 #4 UHMW FI 0 0 3.92 (99.57) 0.75 (19.05) 2.93 (74.42)
4 #4 UHMW I 0 0 3.92 (99.57) 0 2.93 (74.42)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.07 (52.58)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.44 (61.98)
4 #4-12 T303 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 T316 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 UHMW 12 4.17 (105.97) 3.45 (87.63) 0.75 (19.05) 2.46 (62.48)
4 #4-13 Celcon 13 4.4 (111.76) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
4 #4-13 CI 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 T316 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 UHMW 13 4.53 (115.06) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
5 #5-15 T303 15 5.2 (131.95) 4.58 (116.36) 0 3.59 (91.19)
5 #5-15 UHMW 15 5.2 (131.95) 4.58 (116.36) 2 (50.8) 3.46 (87.88)
6 #6 UHMW FI 0 0 5.65 (143.51) 0.75 (19.05) 4.29 (108.97)
6 #6 UHMW I 0 0 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 CI 18 6.24 (158.5) 5.66 (143.67) 0 3.75 (95.25)
6 #6-18 Nylon 18 6.24 (158.5) 5.65 (143.51) 1 (25.4) 4.54 (115.32)
6 #6-18 T316 18 6.24 (158.5) 5.66 (143.67) 1 (25.4) 3.75 (95.25)
6 #6-18 UHMW 18 6.24 (158.5) 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 UHMW FS 18 6.15 (156.16) 5.65 (143.46) 0 4.29 (108.97)
6 #6-18 UHMW Product Release 18 6.4 (162.51) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
6 #6-18 UHMW Split 18 6.24 (158.5) 5.65 (143.46) 0 4.29 (108.97)
6 #6-19 T303 19 6.55 (166.47) 6.03 (153.21) 0 4.8 (121.92)
6 #6-19 UHMW 19 6.55 (166.47) 6.03 (153.21) 1.18 (30) 4.67 (118.62)
8 #8 UHMW FI 0 0 7.38 (187.45) 0.75 (19.05) 5.89 (149.61)
8 #8 UHMW I 0 0 7.38 (187.45) 0 5.89 (149.61)
8 #8-23 CI 23 7.41 (188.11) 7.41 (188.11) 0 5.9 (149.86)
8 #8-23 CI 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.97 (202.41) 7.41 (188.12) 1 (25.4) 4.75 (120.65)
8 #8-23 UHMW 23 7.96 (202.18) 7.39 (187.71) 1 (25.4) 5.9 (149.86)
8 #8-23 UHMW Split 23 7.89 (200.33) 7.39 (187.63) 0 5.9 (149.86)
10 #10-31 CI 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 T316 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.66 (270.76) 10.16 (258.06) 0.99 (25.02) 8.42 (213.87)
12 #12-37 UHMW 37 12.74 (323.49) 12.24 (310.79) 0.99 (25.02) 10.49 (266.45)

*Maximum bores provide adequate material thickness for standard keyway. Specify special sized to be used when necessary.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

MORE INFORMATION

Options

Product Options

Guard Edges

Plates assembled onto belt edges to prevent product from falling off. Guard edges serve to replace bar links on a one-to-one basis. Available heights (above the conveying surface) are: 0.50" (12.7 mm), 0.75" (19.1 mm), 1" (25.4 mm), 1.5" (38.1 mm), and 2" (50.8 mm).

Lane Dividers

Detachable or non-detachable plates assembled into the belt’s surface to locate product. Available heights (above the conveying surface) are: 0.50" (12.7 mm), 0.75" (19.1 mm), 1" (25.4 mm), 1.5" (38.1 mm), and 2" (50.8 mm). The maximum number of lane dividers = Belt Width / 9" (228.6 mm).

Fatigue Resistant Pickets (Patented)

These special pickets, which are manufactured with an outward facing radius centered on the trailing face of the picket, are designed to extend the service life of the belt by approximately 30%. This radius serves to lengthen the belt pitch in selected openings near the outside edge of the belt. This causes the bar links to bear the full load of the belt in a turn, relieving stress on the picket, which increases the belt’s service life.

Downloads

Downloads

Installation, Assembly & Maintenance Instructions

Conveyor System Review Form

Features

Superior Strength & Load Capacity for High Speed, High Tension Spiral and Turn-Curve Applications

Superior Strength & Load Capacity for High Speed, High Tension Spiral and Turn-Curve Applications

Ashworth Omni-Flex® belts are the original turn-curve conveyor belts and have been delivering reliable performance since 1959.

These flat wire belts are constructed with heavy duty, precision formed rod ends for extended cage life and button heads for maximum strength and reduced wear. Unlike straight-running flat wire belts, Omni-Flex® belts are constructed with slots instead of holes. The slotted design allows the belt to collapse on either side, for both left-hand and right-hand turns.

Stainless Steel, Heavy Duty Construction

All Omni-Flex® components are precision crafted from premium quality stainless steel to exacting standards. The finish is smooth and burr-free for easy clean-up and excellent sanitary properties. Two rows of reinforcing bar links are standard to provide strength.

Broad Range of Sizes & Accessories

Available flat wire mesh dimensions for Omni-Flex® belts include 1" x 1", 1/2" x 1" and 1/3" x 1". Ashworth patented fatigue-resistant pickets are available on most Omni-Flex® belts and increase belt service life by about 30%. Other accessories such as guard edges, reinforcing bar links, and lane dividers are available for special needs.

DIRECTION

spiral

SPIRAL

Multi-directional

MULTI

turn-curve

TURN-CURVE

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

REQUEST A QUOTE

Specifications

Technical Specifications

Select another product option

Technical Specifications Units Small Radius Omni-Flex G3
Turn Ratio 1.0 - 1.7
Pitch: Inside in. [mm] 1.084 [27.53]
Pitch: Outside in. [mm] 1.500 [38.10]
Available Widths: Curve in. [mm] 12-54 [305-1372]
Available Widths: Straight in. [mm] 12-54 [305-1372]
Picket Dimension: Inside in. [mm] 0.50 x 0.06 [12.7 x 1.6]
Picket Dimension: Outside in. [mm] 0.50 x 0.05 [12.7 x1.2]
Nominal Opening Size in. 1/2x1 By 1/2x1-1/2
Rod Diameter/Material in. [mm] 0.192 [4.88] / Metal
Conveying Surface in. [mm] Belt Width -0.25
Thickness in. [mm] 0.5 [13]
Allowable Tension: Curve lb. [kg] 300 [136]
Allowable Tension: Straight lb. [kg] 600 [272]
Turn Direction Uni-directional (left or right-must specify direction)
Mode of Turning Inside edge collapses in turn
Mode of Drive Positively driven with precision sprockets

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-9 Hardened Steel 9 0 2.45 (62.23) 1 (25.4) 1.83 (46.48)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1.25 (31.75) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 0.94 (23.81) 1.84 (46.74)
3 #3-9 T316 9 3.16 (80.26) 2.46 (62.48) 1.44 (36.51) 1.84 (46.74)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 1 (25.4) 1.72 (43.69)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 0 1.72 (43.69)
4 #4 UHMW FI 0 0 3.92 (99.57) 0.75 (19.05) 2.93 (74.42)
4 #4 UHMW I 0 0 3.92 (99.57) 0 2.93 (74.42)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.07 (52.58)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.44 (61.98)
4 #4-12 T303 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 T316 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 UHMW 12 4.17 (105.97) 3.45 (87.63) 0.75 (19.05) 2.46 (62.48)
4 #4-13 Celcon 13 4.4 (111.76) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
4 #4-13 CI 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 T316 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 UHMW 13 4.53 (115.06) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
5 #5-15 T303 15 5.2 (131.95) 4.58 (116.36) 0 3.59 (91.19)
5 #5-15 UHMW 15 5.2 (131.95) 4.58 (116.36) 2 (50.8) 3.46 (87.88)
6 #6 UHMW FI 0 0 5.65 (143.51) 0.75 (19.05) 4.29 (108.97)
6 #6 UHMW I 0 0 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 CI 18 6.24 (158.5) 5.66 (143.67) 0 3.75 (95.25)
6 #6-18 Nylon 18 6.24 (158.5) 5.65 (143.51) 1 (25.4) 4.54 (115.32)
6 #6-18 T316 18 6.24 (158.5) 5.66 (143.67) 1 (25.4) 3.75 (95.25)
6 #6-18 UHMW 18 6.24 (158.5) 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 UHMW FS 18 6.15 (156.16) 5.65 (143.46) 0 4.29 (108.97)
6 #6-18 UHMW Product Release 18 6.4 (162.51) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
6 #6-18 UHMW Split 18 6.24 (158.5) 5.65 (143.46) 0 4.29 (108.97)
6 #6-19 T303 19 6.55 (166.47) 6.03 (153.21) 0 4.8 (121.92)
6 #6-19 UHMW 19 6.55 (166.47) 6.03 (153.21) 1.18 (30) 4.67 (118.62)
8 #8 UHMW FI 0 0 7.38 (187.45) 0.75 (19.05) 5.89 (149.61)
8 #8 UHMW I 0 0 7.38 (187.45) 0 5.89 (149.61)
8 #8-23 CI 23 7.41 (188.11) 7.41 (188.11) 0 5.9 (149.86)
8 #8-23 CI 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.97 (202.41) 7.41 (188.12) 1 (25.4) 4.75 (120.65)
8 #8-23 UHMW 23 7.96 (202.18) 7.39 (187.71) 1 (25.4) 5.9 (149.86)
8 #8-23 UHMW Split 23 7.89 (200.33) 7.39 (187.63) 0 5.9 (149.86)
10 #10-31 CI 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 T316 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.66 (270.76) 10.16 (258.06) 0.99 (25.02) 8.42 (213.87)
12 #12-37 UHMW 37 12.74 (323.49) 12.24 (310.79) 0.99 (25.02) 10.49 (266.45)

*Maximum bores provide adequate material thickness for standard keyway. Specify special sized to be used when necessary.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

MORE INFORMATION

Options

Product Options

Guard Edges

Plates assembled onto belt edges to prevent product from falling off. Guard edges serve to replace bar links on a one-to-one basis. Available heights (above the conveying surface) are: 0.50" (12.7 mm), 0.75" (19.1 mm), 1" (25.4 mm), 1.5" (38.1 mm), and 2" (50.8 mm).

Lane Dividers

Detachable or non-detachable plates assembled into the belt’s surface to locate product. Available heights (above the conveying surface) are: 0.50" (12.7 mm), 0.75" (19.1 mm), 1" (25.4 mm), 1.5" (38.1 mm), and 2" (50.8 mm). The maximum number of lane dividers = Belt Width / 9" (228.6 mm).

Fatigue Resistant Pickets (Patented)

These special pickets, which are manufactured with an outward facing radius centered on the trailing face of the picket, are designed to extend the service life of the belt by approximately 30%. This radius serves to lengthen the belt pitch in selected openings near the outside edge of the belt. This causes the bar links to bear the full load of the belt in a turn, relieving stress on the picket, which increases the belt’s service life.

Downloads

Downloads

Installation, Assembly & Maintenance Instructions

Conveyor System Review Form

Related Products

Omni-Grid® 360

Omni-Grid® 360 Weld is offered with a minimum turn ratio of 1.6 times the belt width. An easy retrofit to existing systems

Omni-Pro®

The strongest, most reliable spiral and turn curve conveyor belt available on the market today.

Omni-Flex®

Reliable turn curve and spiral performance since 1959.

Ashworth Brothers Instagram

Ashworth Brothers Vimeo