Omni-Pro is the definitive high-performance stainless-steel spiral conveyor belt!
Omni-Pro®
The Evolutionary Stainless Steel Spiral Conveyor Belt. Combining High Tension Ratings with Maximum Service Life.
Patented heavy duty protective links combined with oversized stainless-steel rods make Omni-Pro the strongest, most reliable spiral and turn curve conveyor belt available on the market today. Omni-Pro is also especially hygienic, due to its open all-steel construction and its unique 360° welds. Providing a combination of benefits unmatched by the competition.
Features
Specifications
Options
Downloads
Features
Increase capacity while minimizing maintenance costs and downtime in your most demanding spiral applications with Omni-Pro Weld.
Omni-Pro® Link
Competitor Link
Proven Reliability
All Ashworth belts are rated for 100,000 cycles versus competition ratings of only 50,000 cycles
Proven Reliability
All Ashworth belts are rated for 100,000 cycles versus competition ratings of only 50,000 cycles
Added Strength & Easy to Clean
Patent pending zero-tension, 360° buttonless welds increase load bearing capacity and are easier to clean versus traditional bridge welds
Added Strength & Easy to Clean
Patent pending zero-tension, 360° buttonless welds increase load bearing capacity and are easier to clean versus traditional bridge welds
Reduced Wear
Patented “protrusion leg” design enables the belt to run smoother with less system wear
Reduced Wear
Patented “protrusion leg” design enables the belt to run smoother with less system wear
Increased Belt Life
Patented coining feature reduces run-in wear and increases belt life
Increased Belt Life
Patented coining feature reduces run-in wear and increases belt life
DIRECTION
SPIRAL
MULTI
TURN-CURVE
STRAIGHT RUN
APPLICATIONS
FREEZER
SMOKER
COOLER
COOKER
DRYER
FRYER
PROOFER
BLANCHER
PASTEURIZING
GRADING
TRANSFER
PACKAGING
Does this meet your project needs?
Does this meet your project needs?
Does this meet your project needs?
Let’s get started!
Let’s get started!
Let’s get started!
Specifications
Technical Specifications
Select another product option
| Technical Specifications | Units | Omni-Pro 075 |
|---|---|---|
| Turn Ratio | 2.2-6 | |
| Pitch | in. [mm] | 0.75 [19.05] |
| Available Widths: Straight Run | in. [mm] | 12-48 [305-1219] |
| Available Widths: Curve/Spiral | in. [mm] | 12-40 [304.80-1016.00] |
| Link Height | in. [mm] | 0.44 [11.11] |
| Rod Diameter/Material | in. [mm] | 0.192 [5] Metal |
| Conveying Surface | in. [mm] | Belt Width -2.19 [-56] |
| Allowable Tension: Curve/Spiral | lb. [kg] | 150 [68] at 100,000 cycles |
| Allowable Tension: Straight Run | lb. [kg] | 300 [136] at 100,000 cycles |
| Turn Direction | Bi-directional | |
| Mode of Turning | Inside edge collapses in turn | |
| Method of Drive | Sprockets driven on links |
Available Sprocket Options
Sprocket Reference
Select another sprocket size
Select a product
| Nom. Size | Display | Teeth | Pitch Diameter in (mm) | Hub Diameter in (mm) | Bore Min in (mm) | Bore Max in (mm) |
|---|---|---|---|---|---|---|
| 3 | #3-12 Hardened Steel | 12 | 2.9 (73.66) | 2.36 (59.94) | 1 (25.4) | 1.8 (45.72) |
| 3 | #3-12 Hardened Steel | 12 | 2.9 (73.66) | 2.36 (59.94) | 1 (25.4) | 1.8 (45.72) |
| 3 | #3-12 T303 | 12 | 2.9 (73.66) | 2.36 (59.94) | 1 (25.4) | 1.8 (45.72) |
| 3 | #3-12 T303 | 12 | 2.9 (73.66) | 2.36 (59.94) | 0.94 (23.81) | 1.8 (45.72) |
| 3 | #3-12 UHMW | 12 | 2.9 (73.66) | 2.25 (57.15) | 0 | 1.5 (38.1) |
| 3 | #3-16 UHMW | 16 | 3.84 (97.63) | 3 (76.2) | 1.58 (40.01) | 2.13 (54.1) |
| 3 | #3-16 UHMW | 16 | 3.84 (97.64) | 3 (76.2) | 1 (25.4) | 2.13 (54.1) |
| 4 | #4-17 T303 | 17 | 4.08 (103.68) | 3.58 (90.81) | 0 | 2.83 (71.88) |
| 4 | #4-17 UHMW | 17 | 4.08 (103.68) | 3.58 (90.81) | 0.75 (19.05) | 2.58 (65.53) |
| 4 | #4-17 UHMW | 17 | 4.08 (103.68) | 3.58 (90.81) | 1 (25.4) | 2.58 (65.53) |
| 4 | #4-18 T303 | 18 | 4.32 (109.68) | 3.82 (96.9) | 0 | 2.95 (74.93) |
| 4 | #4-18 T303 | 18 | 4.32 (109.68) | 3.82 (96.9) | 1.58 (40.01) | 2.82 (71.63) |
| 5 | #5-19 UHMW | 19 | 4.56 (115.75) | 4.06 (103.05) | 0.75 (19.05) | 2.94 (74.68) |
| 5 | #5-21 T303 | 21 | 5.03 (127.81) | 4.54 (115.27) | 1 (25.4) | 3.55 (90.17) |
| 5 | #5-21 UHMW | 21 | 5.03 (127.81) | 4.54 (115.27) | 1 (25.4) | 3.42 (86.87) |
| 5 | #5-21 UHMW FS | 21 | 4.79 (121.67) | 4.54 (115.32) | 1 (25.4) | 3.42 (86.87) |
| 6 | #6 UHMW FI | 0 | 0 | 6 (152.4) | 0.75 (19.05) | 4.64 (117.86) |
| 6 | #6 UHMW I | 0 | 0 | 6 (152.4) | 0.75 (19.05) | 4.64 (117.86) |
| 6 | #6-25 T303 | 25 | 5.98 (151.99) | 5.5 (139.67) | 0 | 4.39 (111.51) |
| 6 | #6-25 T303 | 25 | 5.98 (151.99) | 5.5 (139.67) | 0.5 (12.7) | 4.39 (111.51) |
| 6 | #6-25 UHMW | 25 | 5.98 (151.99) | 5.5 (139.67) | 0.88 (22.22) | 4.14 (105.16) |
| 6 | #6-26 T303 | 26 | 6.22 (158.04) | 5.73 (145.64) | 0 | 4.62 (117.35) |
| 6 | #6-26 T303 | 26 | 6.22 (158.04) | 5.73 (145.64) | 1.58 (40.01) | 4.62 (117.35) |
| 6 | #6-26 T303 | 26 | 6.22 (158.04) | 5.73 (145.64) | 1.58 (40.01) | 4.62 (117.35) |
| 6 | #6-26 UHMW | 26 | 6.22 (158.04) | 5.73 (145.64) | 1 (25.4) | 4.37 (111) |
| 6 | #6-27 UHMW | 27 | 6.42 (163.12) | 5.97 (151.61) | 0.88 (22.22) | 4.61 (117.09) |
| 8 | #8-34 UHMW | 34 | 8.13 (206.45) | 7.66 (194.46) | 1 (25.4) | 5.93 (150.62) |
Sprockets available in stainless steel, plain steel, and UHMWPE.
UHMWPE material type components have a 150° F (66°C) maximum operation temperature.
Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.
*Maximum bores provide adequate material thickness for standard keyway. Specify special sized to be used when necessary.
Support are required at a minimum of 18" apart on load side and 24" maximum on return side. Rollers may also be used. For light loads, support rails may be placed further apart. Consult Ashworth Engineering for assistance.
Material Reference
- Acetal - polyoxymethylene plastic
- Celcon - acetal copolymer
- CI - cast iron
- Hardened Steel
- Nylon
- T303 - stainless steel
- T316 - stainless steel
- UMHW - polyethylene plastic
Need more detailed information?
Need more detailed information?
Need more detailed information?
Belt Calculator
No Results
Base Belt Weight
Belt Pitch
Turn Ratio
Belt Strength
Min Filler Roll Diameter
Conveying Surface
Inside Conveying Surface
Outside Conveying Surface
Mesh Opening Size
Open Area Surface
Open Area Thru
Need more detailed information?
Need more detailed information?
Need more detailed information?
Options
Product Options
Omni-Tough Mesh Overlay
2½ times stronger than conventional
overlays and is resistant to product
sticking in freezer applications
Patented Pigtail Spirals
Reduces wear breakage
Integral Guard Edges
Available in 100/120/150, are more
durable and easier to clean than
modular guard edges
Patented Special Mesh Spirals
A cost effective solution for adding
lane dividers or flights
Does this meet your project needs?
Does this meet your project needs?
Does this meet your project needs?
Let’s get started!
Let’s get started!
Let’s get started!
Downloads
Downloads
Technical Bulletins
Installation, Assembly & Maintenance Instructions
Conveyor System Review Form
Illustrations
-
B18-12-17 OP100 IGE
-
B18-12-17 OP100
-
B24-8-16 OP150
-
B24-12-16 OP100 WOVEN LD
-
B24-12-17 OP100
-
B24-16-16 OP075
-
B30-12-17 OP100
-
B36-10-16 OP120
-
B36-12-16 OP100 IGE + FLIGHT
-
B36-12-16 OP100
-
B36-16-17 OP075
-
B48-12-17 OP100
-
B60-16-16 OP075
-
B72-12-17 OP100
-
U42-10-16 OP120
-
U48-10-16 OP120
-
U54-12-16 OP100 IGE
-
NO MESH OP100
-
OP075 B18 16 16
-
OP075 B18 16 17
-
OP075 B24 16 16
-
OP075 B24 16 17
-
OP075 B36 16 16
-
OP075 B36 16 17
-
OP075 B42 16 16
-
OP075 B42 16 17
-
OP075 B48 16 16
-
OP075 B48 16 17
-
OP075 B54 16 16
-
OP075 B54 16 17
-
OP075 B60 16 16
-
OP075 B60 16 17
-
OP075 B72 16 16
-
OP075 B72 16 17
-
OP075 ROD ONLY
-
OP100 B24 12 16
-
OP100 B24 12 17
-
OP100 B30 12 17
-
OP100 B36 12 17
-
OP100 B42 12 17
-
OP100 B48 12 16
-
OP100 B48 12 17
-
OP100 B54 12 16
-
OP100 B54 12 17
-
OP100 B60 12 16
-
OP100 B60 12 17
-
OP100 B72 12 16
-
OP100 NO MESH
-
OP100 U48 12 16
-
OP100 U54 12 16
-
OP100 U54 12 17
-
OP100 U60 12 17
-
OP120 B18 10 16
-
OP120 Rod Only
-
OP120 B18 10 17
-
OP120 B24 10 16
-
OP120 B30 10 16
-
OP120 B30 10 17
-
OP120 B36 10 16
-
OP120 B36 10 17
-
OP120 B48 10 16
-
OP120 B48 10 17
-
OP120 B54 10 16
-
OP120 U48 10 16
-
OP150 U54 8 17
-
OP150 B24 8 17
-
OP150 B30 8 17
-
OP150 B42 8 16
-
OP150 Rod Only
-
OP150 U36 8 16
-
OP150 U48 8 16
-
OP150 U54 8 16
-
OP150 U60 8 17
-
RROP100 B36 12 17
Features
Increase capacity while minimizing maintenance costs and downtime in your most demanding spiral applications with Omni-Pro Weld.
Omni-Pro® Link
Competitor Link
Proven Reliability
All Ashworth belts are rated for 100,000 cycles versus competition ratings of only 50,000 cycles
Proven Reliability
All Ashworth belts are rated for 100,000 cycles versus competition ratings of only 50,000 cycles
Added Strength & Easy to Clean
Patent pending zero-tension, 360° buttonless welds increase load bearing capacity and are easier to clean versus traditional bridge welds
Added Strength & Easy to Clean
Patent pending zero-tension, 360° buttonless welds increase load bearing capacity and are easier to clean versus traditional bridge welds
Reduced Wear
Patented “protrusion leg” design enables the belt to run smoother with less system wear
Reduced Wear
Patented “protrusion leg” design enables the belt to run smoother with less system wear
Increased Belt Life
Patented coining feature reduces run-in wear and increases belt life
Increased Belt Life
Patented coining feature reduces run-in wear and increases belt life
DIRECTION
SPIRAL
MULTI
TURN-CURVE
STRAIGHT RUN
APPLICATIONS
FREEZER
SMOKER
COOLER
COOKER
DRYER
FRYER
PROOFER
BLANCHER
PASTEURIZING
GRADING
TRANSFER
PACKAGING
Does this meet your project needs?
Does this meet your project needs?
Does this meet your project needs?
Let’s get started!
Let’s get started!
Let’s get started!
Specifications
Technical Specifications
Select another product option
| Technical Specifications | Units | Omni-Pro 100 |
|---|---|---|
| Turn Ratio | 1.7-6 | |
| Pitch | in. [mm] | 1.08 [27.43] |
| Available Widths: Straight Run | in. [mm] | 12-48 [305-1219] |
| Available Widths: Curve/Spiral | in. [mm] | 12-40 [304.80-1016.00] |
| Link Height | in. [mm] | 0.50 [12.70] |
| Rod Diameter/Material | in. [mm] | 0.192 [5] Metal |
| Conveying Surface | in. [mm] | Belt Width -2.69 [-68] |
| Allowable Tension: Curve/Spiral | lb. [kg] | 200 [91] at 100,000 cycles |
| Allowable Tension: Straight Run | lb. [kg] | 400 [181] at 100,000 cycles |
| Turn Direction | Bi-directional | |
| Mode of Turning | Inside edge collapses in turn | |
| Method of Drive | Sprockets driven on links |
Available Sprocket Options
Sprocket Reference
Select another sprocket size
Select a product
| Nom. Size | Display | Teeth | Pitch Diameter in (mm) | Hub Diameter in (mm) | Bore Min in (mm) | Bore Max in (mm) |
|---|---|---|---|---|---|---|
| 3 | #3-9 Hardened Steel | 9 | 0 | 2.45 (62.23) | 1 (25.4) | 1.83 (46.48) |
| 3 | #3-9 T303 | 9 | 3.16 (80.26) | 2.46 (62.48) | 1 (25.4) | 1.84 (46.74) |
| 3 | #3-9 T303 | 9 | 3.16 (80.26) | 2.46 (62.48) | 1 (25.4) | 1.84 (46.74) |
| 3 | #3-9 T303 | 9 | 3.16 (80.26) | 2.46 (62.48) | 1.25 (31.75) | 1.84 (46.74) |
| 3 | #3-9 T303 | 9 | 3.16 (80.26) | 2.46 (62.48) | 0.94 (23.81) | 1.84 (46.74) |
| 3 | #3-9 T316 | 9 | 3.16 (80.26) | 2.46 (62.48) | 1.44 (36.51) | 1.84 (46.74) |
| 3 | #3-9 UHMW | 9 | 3.16 (80.26) | 2.53 (64.26) | 1 (25.4) | 1.72 (43.69) |
| 3 | #3-9 UHMW | 9 | 3.16 (80.26) | 2.53 (64.26) | 0 | 1.72 (43.69) |
| 4 | #4 UHMW FI | 0 | 0 | 3.92 (99.57) | 0.75 (19.05) | 2.93 (74.42) |
| 4 | #4 UHMW I | 0 | 0 | 3.92 (99.57) | 0 | 2.93 (74.42) |
| 4 | #4-11 T303 | 11 | 3.83 (97.36) | 3.18 (80.72) | 0 | 2.07 (52.58) |
| 4 | #4-11 T303 | 11 | 3.83 (97.36) | 3.18 (80.72) | 0 | 2.44 (61.98) |
| 4 | #4-12 T303 | 12 | 4.17 (105.97) | 3.54 (89.92) | 0 | 2.8 (71.12) |
| 4 | #4-12 T316 | 12 | 4.17 (105.97) | 3.54 (89.92) | 0 | 2.8 (71.12) |
| 4 | #4-12 UHMW | 12 | 4.17 (105.97) | 3.45 (87.63) | 0.75 (19.05) | 2.46 (62.48) |
| 4 | #4-13 Celcon | 13 | 4.4 (111.76) | 3.9 (99.06) | 1 (25.4) | 2.91 (73.91) |
| 4 | #4-13 CI | 13 | 4.53 (115.09) | 3.91 (99.22) | 0 | 3.04 (77.22) |
| 4 | #4-13 T316 | 13 | 4.53 (115.09) | 3.91 (99.22) | 0 | 3.04 (77.22) |
| 4 | #4-13 UHMW | 13 | 4.53 (115.06) | 3.9 (99.06) | 1 (25.4) | 2.91 (73.91) |
| 5 | #5-15 T303 | 15 | 5.2 (131.95) | 4.58 (116.36) | 0 | 3.59 (91.19) |
| 5 | #5-15 UHMW | 15 | 5.2 (131.95) | 4.58 (116.36) | 2 (50.8) | 3.46 (87.88) |
| 6 | #6 UHMW FI | 0 | 0 | 5.65 (143.51) | 0.75 (19.05) | 4.29 (108.97) |
| 6 | #6 UHMW I | 0 | 0 | 5.65 (143.51) | 0 | 4.29 (108.97) |
| 6 | #6-18 CI | 18 | 6.24 (158.5) | 5.66 (143.67) | 0 | 3.75 (95.25) |
| 6 | #6-18 Nylon | 18 | 6.24 (158.5) | 5.65 (143.51) | 1 (25.4) | 4.54 (115.32) |
| 6 | #6-18 T316 | 18 | 6.24 (158.5) | 5.66 (143.67) | 1 (25.4) | 3.75 (95.25) |
| 6 | #6-18 UHMW | 18 | 6.24 (158.5) | 5.65 (143.51) | 0 | 4.29 (108.97) |
| 6 | #6-18 UHMW FS | 18 | 6.15 (156.16) | 5.65 (143.46) | 0 | 4.29 (108.97) |
| 6 | #6-18 UHMW Product Release | 18 | 6.4 (162.51) | 5.65 (143.46) | 1 (25.4) | 4.29 (108.97) |
| 6 | #6-18 UHMW Split | 18 | 6.24 (158.5) | 5.65 (143.46) | 0 | 4.29 (108.97) |
| 6 | #6-19 T303 | 19 | 6.55 (166.47) | 6.03 (153.21) | 0 | 4.8 (121.92) |
| 6 | #6-19 UHMW | 19 | 6.55 (166.47) | 6.03 (153.21) | 1.18 (30) | 4.67 (118.62) |
| 8 | #8 UHMW FI | 0 | 0 | 7.38 (187.45) | 0.75 (19.05) | 5.89 (149.61) |
| 8 | #8 UHMW I | 0 | 0 | 7.38 (187.45) | 0 | 5.89 (149.61) |
| 8 | #8-23 CI | 23 | 7.41 (188.11) | 7.41 (188.11) | 0 | 5.9 (149.86) |
| 8 | #8-23 CI | 23 | 7.96 (202.18) | 7.41 (188.12) | 0 | 4.75 (120.65) |
| 8 | #8-23 T316 | 23 | 7.96 (202.18) | 7.41 (188.12) | 0 | 4.75 (120.65) |
| 8 | #8-23 T316 | 23 | 7.97 (202.41) | 7.41 (188.12) | 1 (25.4) | 4.75 (120.65) |
| 8 | #8-23 UHMW | 23 | 7.96 (202.18) | 7.39 (187.71) | 1 (25.4) | 5.9 (149.86) |
| 8 | #8-23 UHMW Split | 23 | 7.89 (200.33) | 7.39 (187.63) | 0 | 5.9 (149.86) |
| 10 | #10-31 CI | 31 | 10.72 (272.29) | 10.16 (258.06) | 0 | 8.67 (220.22) |
| 10 | #10-31 T316 | 31 | 10.72 (272.29) | 10.16 (258.06) | 0 | 8.67 (220.22) |
| 10 | #10-31 UHMW | 31 | 10.66 (270.76) | 10.16 (258.06) | 0.99 (25.02) | 8.42 (213.87) |
| 12 | #12-37 UHMW | 37 | 12.74 (323.49) | 12.24 (310.79) | 0.99 (25.02) | 10.49 (266.45) |
UHMWPE material type components have a 150° F (66°C) maximum operation temperature.
*Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.
Support are required at a minimum of 18" apart on load side and 24" maximum on return side. Rollers may also be used. For light loads, support rails may be placed further apart. Consult Ashworth Engineering for assistance.
Material Reference
- Acetal - polyoxymethylene plastic
- Celcon - acetal copolymer
- CI - cast iron
- Hardened Steel
- Nylon
- T303 - stainless steel
- T316 - stainless steel
- UMHW - polyethylene plastic
Need more detailed information?
Need more detailed information?
Need more detailed information?
Belt Calculator
No Results
Base Belt Weight
Belt Pitch
Turn Ratio
Belt Strength
Min Filler Roll Diameter
Conveying Surface
Inside Conveying Surface
Outside Conveying Surface
Mesh Opening Size
Open Area Surface
Open Area Thru
Need more detailed information?
Need more detailed information?
Need more detailed information?
Options
Product Options
Omni-Tough Mesh Overlay
2½ times stronger than conventional
overlays and is resistant to product
sticking in freezer applications
Patented Pigtail Spirals
Reduces wear breakage
Integral Guard Edges
Available in 100/120/150, are more
durable and easier to clean than
modular guard edges
Patented Special Mesh Spirals
A cost effective solution for adding
lane dividers or flights
Does this meet your project needs?
Does this meet your project needs?
Does this meet your project needs?
Let’s get started!
Let’s get started!
Let’s get started!
Downloads
Downloads
Technical Bulletins
Installation, Assembly & Maintenance Instructions
Conveyor System Review Form
Illustrations
-
B18-12-17 OP100 IGE
-
B18-12-17 OP100
-
B24-8-16 OP150
-
B24-12-16 OP100 WOVEN LD
-
B24-12-17 OP100
-
B24-16-16 OP075
-
B30-12-17 OP100
-
B36-10-16 OP120
-
B36-12-16 OP100 IGE + FLIGHT
-
B36-12-16 OP100
-
B36-16-17 OP075
-
B48-12-17 OP100
-
B60-16-16 OP075
-
B72-12-17 OP100
-
U42-10-16 OP120
-
U48-10-16 OP120
-
U54-12-16 OP100 IGE
-
NO MESH OP100
-
OP075 B18 16 16
-
OP075 B18 16 17
-
OP075 B24 16 16
-
OP075 B24 16 17
-
OP075 B36 16 16
-
OP075 B36 16 17
-
OP075 B42 16 16
-
OP075 B42 16 17
-
OP075 B48 16 16
-
OP075 B48 16 17
-
OP075 B54 16 16
-
OP075 B54 16 17
-
OP075 B60 16 16
-
OP075 B60 16 17
-
OP075 B72 16 16
-
OP075 B72 16 17
-
OP075 ROD ONLY
-
OP100 B24 12 16
-
OP100 B24 12 17
-
OP100 B30 12 17
-
OP100 B36 12 17
-
OP100 B42 12 17
-
OP100 B48 12 16
-
OP100 B48 12 17
-
OP100 B54 12 16
-
OP100 B54 12 17
-
OP100 B60 12 16
-
OP100 B60 12 17
-
OP100 B72 12 16
-
OP100 NO MESH
-
OP100 U48 12 16
-
OP100 U54 12 16
-
OP100 U54 12 17
-
OP100 U60 12 17
-
OP120 B18 10 16
-
OP120 Rod Only
-
OP120 B18 10 17
-
OP120 B24 10 16
-
OP120 B30 10 16
-
OP120 B30 10 17
-
OP120 B36 10 16
-
OP120 B36 10 17
-
OP120 B48 10 16
-
OP120 B48 10 17
-
OP120 B54 10 16
-
OP120 U48 10 16
-
OP150 U54 8 17
-
OP150 B24 8 17
-
OP150 B30 8 17
-
OP150 B42 8 16
-
OP150 Rod Only
-
OP150 U36 8 16
-
OP150 U48 8 16
-
OP150 U54 8 16
-
OP150 U60 8 17
-
RROP100 B36 12 17
Features
Increase capacity while minimizing maintenance costs and downtime in your most demanding spiral applications with Omni-Pro Weld.
Omni-Pro® Link
Competitor Link
Proven Reliability
All Ashworth belts are rated for 100,000 cycles versus competition ratings of only 50,000 cycles
Proven Reliability
All Ashworth belts are rated for 100,000 cycles versus competition ratings of only 50,000 cycles
Added Strength & Easy to Clean
Patent pending zero-tension, 360° buttonless welds increase load bearing capacity and are easier to clean versus traditional bridge welds
Added Strength & Easy to Clean
Patent pending zero-tension, 360° buttonless welds increase load bearing capacity and are easier to clean versus traditional bridge welds
Reduced Wear
Patented “protrusion leg” design enables the belt to run smoother with less system wear
Reduced Wear
Patented “protrusion leg” design enables the belt to run smoother with less system wear
Increased Belt Life
Patented coining feature reduces run-in wear and increases belt life
Increased Belt Life
Patented coining feature reduces run-in wear and increases belt life
DIRECTION
SPIRAL
MULTI
TURN-CURVE
STRAIGHT RUN
APPLICATIONS
FREEZER
SMOKER
COOLER
COOKER
DRYER
FRYER
PROOFER
BLANCHER
PASTEURIZING
GRADING
TRANSFER
PACKAGING
Does this meet your project needs?
Does this meet your project needs?
Does this meet your project needs?
Let’s get started!
Let’s get started!
Let’s get started!
Specifications
Technical Specifications
Select another product option
| Technical Specifications | Units | Omni-Pro 120 |
|---|---|---|
| Turn Ratio | 1.7-6 | |
| Pitch | in. [mm] | 1.20 [30.48] |
| Available Widths: Straight Run | in. [mm] | 12-60 [305-1524] |
| Available Widths: Curve/Spiral | in. [mm] | 12-54 [304.80-1371.60] |
| Link Height | in. [mm] | 0.59 [14.99] |
| Rod Diameter/Material | in. [mm] | 0.236 [6] Metal |
| Conveying Surface | in. [mm] | Belt Width -3.15 [-80] |
| Allowable Tension: Curve/Spiral | lb. [kg] | 400 [181] at 100,000 cycles |
| Allowable Tension: Straight Run | lb. [kg] | 800 [363] at 100,000 cycles |
| Turn Direction | Bi-directional | |
| Mode of Turning | Inside edge collapses in turn | |
| Method of Drive | Sprockets driven on links |
Available Sprocket Options
Sprocket Reference
Select another sprocket size
Select a product
| Nom. Size | Display | Teeth | Pitch Diameter in (mm) | Hub Diameter in (mm) | Bore Min in (mm) | Bore Max in (mm) |
|---|---|---|---|---|---|---|
| 6 | #6 UHMW FI | 0 | 0 | 5.47 (138.94) | 0 | 4.11 (104.39) |
| 6 | #6 UHMW I | 0 | 0 | 5.47 (138.94) | 0 | 4.11 (104.39) |
| 6 | #6-16 T303 | 16 | 6.11 (155.19) | 5.47 (138.94) | 0.75 (19.05) | 4.36 (110.74) |
| 6 | #6-16 UHMW | 16 | 6.11 (155.19) | 5.47 (138.94) | 0 | 4.11 (104.39) |
| 8 | #8-21 T303 | 21 | 7.38 (187.45) | 7.38 (187.45) | 0 | 5.9 (149.86) |
| 8 | #8-21 T303 | 21 | 8.05 (204.47) | 7.38 (187.45) | 0 | 5.9 (149.86) |
| 8 | #8-21 UHMW | 21 | 8.05 (204.47) | 7.38 (187.45) | 1 (25.4) | 5.89 (149.61) |
| 8 | #8-21 UHMW FS | 21 | 8.05 (204.47) | 7.38 (187.45) | 1 (25.4) | 5.89 (149.61) |
Sprockets available in stainless steel, plain steel, and UHMWPE.
UHMWPE material type components have a 150° F (66°C) maximum operation temperature.
Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.
*Maximum bores provide adequate material thickness for standard keyway. Specify special sized to be used when necessary.
Support are required at a minimum of 18" apart on load side and 24" maximum on return side. Rollers may also be used. For light loads, support rails may be placed further apart. Consult Ashworth Engineering for assistance.
Material Reference
- Acetal - polyoxymethylene plastic
- Celcon - acetal copolymer
- CI - cast iron
- Hardened Steel
- Nylon
- T303 - stainless steel
- T316 - stainless steel
- UMHW - polyethylene plastic
Need more detailed information?
Need more detailed information?
Need more detailed information?
Options
Product Options
Omni-Tough Mesh Overlay
2½ times stronger than conventional
overlays and is resistant to product
sticking in freezer applications
Patented Pigtail Spirals
Reduces wear breakage
Integral Guard Edges
Available in 100/120/150, are more
durable and easier to clean than
modular guard edges
Patented Special Mesh Spirals
A cost effective solution for adding
lane dividers or flights
Does this meet your project needs?
Does this meet your project needs?
Does this meet your project needs?
Let’s get started!
Let’s get started!
Let’s get started!
Downloads
Downloads
Technical Bulletins
Installation, Assembly & Maintenance Instructions
Conveyor System Review Form
Illustrations
-
B18-12-17 OP100 IGE
-
B18-12-17 OP100
-
B24-8-16 OP150
-
B24-12-16 OP100 WOVEN LD
-
B24-12-17 OP100
-
B24-16-16 OP075
-
B30-12-17 OP100
-
B36-10-16 OP120
-
B36-12-16 OP100 IGE + FLIGHT
-
B36-12-16 OP100
-
B36-16-17 OP075
-
B48-12-17 OP100
-
B60-16-16 OP075
-
B72-12-17 OP100
-
U42-10-16 OP120
-
U48-10-16 OP120
-
U54-12-16 OP100 IGE
-
NO MESH OP100
-
OP075 B18 16 16
-
OP075 B18 16 17
-
OP075 B24 16 16
-
OP075 B24 16 17
-
OP075 B36 16 16
-
OP075 B36 16 17
-
OP075 B42 16 16
-
OP075 B42 16 17
-
OP075 B48 16 16
-
OP075 B48 16 17
-
OP075 B54 16 16
-
OP075 B54 16 17
-
OP075 B60 16 16
-
OP075 B60 16 17
-
OP075 B72 16 16
-
OP075 B72 16 17
-
OP075 ROD ONLY
-
OP100 B24 12 16
-
OP100 B24 12 17
-
OP100 B30 12 17
-
OP100 B36 12 17
-
OP100 B42 12 17
-
OP100 B48 12 16
-
OP100 B48 12 17
-
OP100 B54 12 16
-
OP100 B54 12 17
-
OP100 B60 12 16
-
OP100 B60 12 17
-
OP100 B72 12 16
-
OP100 NO MESH
-
OP100 U48 12 16
-
OP100 U54 12 16
-
OP100 U54 12 17
-
OP100 U60 12 17
-
OP120 B18 10 16
-
OP120 Rod Only
-
OP120 B18 10 17
-
OP120 B24 10 16
-
OP120 B30 10 16
-
OP120 B30 10 17
-
OP120 B36 10 16
-
OP120 B36 10 17
-
OP120 B48 10 16
-
OP120 B48 10 17
-
OP120 B54 10 16
-
OP120 U48 10 16
-
OP150 U54 8 17
-
OP150 B24 8 17
-
OP150 B30 8 17
-
OP150 B42 8 16
-
OP150 Rod Only
-
OP150 U36 8 16
-
OP150 U48 8 16
-
OP150 U54 8 16
-
OP150 U60 8 17
-
RROP100 B36 12 17
Features
Increase capacity while minimizing maintenance costs and downtime in your most demanding spiral applications with Omni-Pro Weld.
Omni-Pro® Link
Competitor Link
Proven Reliability
All Ashworth belts are rated for 100,000 cycles versus competition ratings of only 50,000 cycles
Proven Reliability
All Ashworth belts are rated for 100,000 cycles versus competition ratings of only 50,000 cycles
Added Strength & Easy to Clean
Patent pending zero-tension, 360° buttonless welds increase load bearing capacity and are easier to clean versus traditional bridge welds
Added Strength & Easy to Clean
Patent pending zero-tension, 360° buttonless welds increase load bearing capacity and are easier to clean versus traditional bridge welds
Reduced Wear
Patented “protrusion leg” design enables the belt to run smoother with less system wear
Reduced Wear
Patented “protrusion leg” design enables the belt to run smoother with less system wear
Increased Belt Life
Patented coining feature reduces run-in wear and increases belt life
Increased Belt Life
Patented coining feature reduces run-in wear and increases belt life
DIRECTION
SPIRAL
MULTI
TURN-CURVE
STRAIGHT RUN
APPLICATIONS
FREEZER
SMOKER
COOLER
COOKER
DRYER
FRYER
PROOFER
BLANCHER
PASTEURIZING
GRADING
TRANSFER
PACKAGING
Does this meet your project needs?
Does this meet your project needs?
Does this meet your project needs?
Let’s get started!
Let’s get started!
Let’s get started!
Specifications
Technical Specifications
Select another product option
| Technical Specifications | Units | Omni-Pro 150 |
|---|---|---|
| Turn Ratio | 1.6-6 | |
| Pitch | in. [mm] | 1.50 [38.10] |
| Available Widths: Straight Run | in. [mm] | 12-60 [305-1524] |
| Available Widths: Curve/Spiral | in. [mm] | 12-54 [304.80-1371.60] |
| Link Height | in. [mm] | 0.59 [14.99] |
| Rod Diameter/Material | in. [mm] | 0.236 [6] Metal |
| Conveying Surface | in. [mm] | Belt Width -3.16 [-80] |
| Allowable Tension: Curve/Spiral | lb. [kg] | 400 [181] at 100,000 cycles |
| Allowable Tension: Straight Run | lb. [kg] | 800 [363] at 100,000 cycles |
| Turn Direction | Bi-directional | |
| Mode of Turning | Inside edge collapses in turn | |
| Method of Drive | Sprockets driven on links |
Available Sprocket Options
Sprocket Reference
Select another sprocket size
Select a product
| Nom. Size | Display | Teeth | Pitch Diameter in (mm) | Hub Diameter in (mm) | Bore Min in (mm) | Bore Max in (mm) |
|---|---|---|---|---|---|---|
| 6 | #6 UHMW FI | 0 | 0 | 5.5 (139.7) | 0.75 (19.05) | 4.14 (105.16) |
| 6 | #6 UHMW I | 0 | 0 | 5.5 (139.7) | 0.75 (19.05) | 4.14 (105.16) |
| 6 | #6-13 UHMW Not Recommended | 13 | 6.27 (159.26) | 5.5 (139.7) | 0 | 4.14 (105.16) |
| 8 | #8 UHMW FI | 0 | 0 | 7.43 (188.72) | 0 | 5.94 (150.88) |
| 8 | #8 UHMW I | 0 | 0 | 7.43 (188.72) | 0.75 (19.05) | 5.94 (150.88) |
| 8 | #8-17 T303 | 17 | 8.16 (207.26) | 7.43 (188.72) | 0 | 5.95 (151.13) |
| 8 | #8-17 UHMW | 17 | 8.16 (207.26) | 7.43 (188.72) | 0.75 (19.05) | 5.94 (150.88) |
Sprockets available in stainless steel, plain steel, and UHMWPE.
UHMWPE material type components have a 150° F (66°C) maximum operation temperature.
Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.
*Maximum bores provide adequate material thickness for standard keyway. Specify special sized to be used when necessary.
Support are required at a minimum of 18" apart on load side and 24" maximum on return side. Rollers may also be used. For light loads, support rails may be placed further apart. Consult Ashworth Engineering for assistance.
Material Reference
- Acetal - polyoxymethylene plastic
- Celcon - acetal copolymer
- CI - cast iron
- Hardened Steel
- Nylon
- T303 - stainless steel
- T316 - stainless steel
- UMHW - polyethylene plastic
Belt Calculator
No Results
Base Belt Weight
Belt Pitch
Turn Ratio
Belt Strength
Min Filler Roll Diameter
Conveying Surface
Inside Conveying Surface
Outside Conveying Surface
Mesh Opening Size
Open Area Surface
Open Area Thru
Need more detailed information?
Need more detailed information?
Need more detailed information?
Options
Product Options
Omni-Tough Mesh Overlay
2½ times stronger than conventional
overlays and is resistant to product
sticking in freezer applications
Patented Pigtail Spirals
Reduces wear breakage
Integral Guard Edges
Available in 100/120/150, are more
durable and easier to clean than
modular guard edges
Patented Special Mesh Spirals
A cost effective solution for adding
lane dividers or flights
Does this meet your project needs?
Does this meet your project needs?
Does this meet your project needs?
Let’s get started!
Let’s get started!
Let’s get started!
Downloads
Downloads
Technical Bulletins
Installation, Assembly & Maintenance Instructions
Conveyor System Review Form
Illustrations
-
B18-12-17 OP100 IGE
-
B18-12-17 OP100
-
B24-8-16 OP150
-
B24-12-16 OP100 WOVEN LD
-
B24-12-17 OP100
-
B24-16-16 OP075
-
B30-12-17 OP100
-
B36-10-16 OP120
-
B36-12-16 OP100 IGE + FLIGHT
-
B36-12-16 OP100
-
B36-16-17 OP075
-
B48-12-17 OP100
-
B60-16-16 OP075
-
B72-12-17 OP100
-
U42-10-16 OP120
-
U48-10-16 OP120
-
U54-12-16 OP100 IGE
-
NO MESH OP100
-
OP075 B18 16 16
-
OP075 B18 16 17
-
OP075 B24 16 16
-
OP075 B24 16 17
-
OP075 B36 16 16
-
OP075 B36 16 17
-
OP075 B42 16 16
-
OP075 B42 16 17
-
OP075 B48 16 16
-
OP075 B48 16 17
-
OP075 B54 16 16
-
OP075 B54 16 17
-
OP075 B60 16 16
-
OP075 B60 16 17
-
OP075 B72 16 16
-
OP075 B72 16 17
-
OP075 ROD ONLY
-
OP100 B24 12 16
-
OP100 B24 12 17
-
OP100 B30 12 17
-
OP100 B36 12 17
-
OP100 B42 12 17
-
OP100 B48 12 16
-
OP100 B48 12 17
-
OP100 B54 12 16
-
OP100 B54 12 17
-
OP100 B60 12 16
-
OP100 B60 12 17
-
OP100 B72 12 16
-
OP100 NO MESH
-
OP100 U48 12 16
-
OP100 U54 12 16
-
OP100 U54 12 17
-
OP100 U60 12 17
-
OP120 B18 10 16
-
OP120 Rod Only
-
OP120 B18 10 17
-
OP120 B24 10 16
-
OP120 B30 10 16
-
OP120 B30 10 17
-
OP120 B36 10 16
-
OP120 B36 10 17
-
OP120 B48 10 16
-
OP120 B48 10 17
-
OP120 B54 10 16
-
OP120 U48 10 16
-
OP150 U54 8 17
-
OP150 B24 8 17
-
OP150 B30 8 17
-
OP150 B42 8 16
-
OP150 Rod Only
-
OP150 U36 8 16
-
OP150 U48 8 16
-
OP150 U54 8 16
-
OP150 U60 8 17
-
RROP100 B36 12 17
Features
Increase capacity while minimizing maintenance costs and downtime in your most demanding spiral applications with Omni-Pro Weld.
Omni-Pro® Link
Competitor Link
Proven Reliability
All Ashworth belts are rated for 100,000 cycles versus competition ratings of only 50,000 cycles
Proven Reliability
All Ashworth belts are rated for 100,000 cycles versus competition ratings of only 50,000 cycles
Added Strength & Easy to Clean
Patent pending zero-tension, 360° buttonless welds increase load bearing capacity and are easier to clean versus traditional bridge welds
Added Strength & Easy to Clean
Patent pending zero-tension, 360° buttonless welds increase load bearing capacity and are easier to clean versus traditional bridge welds
Reduced Wear
Patented “protrusion leg” design enables the belt to run smoother with less system wear
Reduced Wear
Patented “protrusion leg” design enables the belt to run smoother with less system wear
Increased Belt Life
Patented coining feature reduces run-in wear and increases belt life
Increased Belt Life
Patented coining feature reduces run-in wear and increases belt life
DIRECTION
SPIRAL
MULTI
TURN-CURVE
STRAIGHT RUN
APPLICATIONS
FREEZER
SMOKER
COOLER
COOKER
DRYER
FRYER
PROOFER
BLANCHER
PASTEURIZING
GRADING
TRANSFER
PACKAGING
Does this meet your project needs?
Does this meet your project needs?
Does this meet your project needs?
Let’s get started!
Let’s get started!
Let’s get started!
Specifications
Technical Specifications
Select another product option
| Technical Specifications | Units | Small Radius Omni-Pro 075 |
|---|---|---|
| Turn Ratio | 1.1-1.99 | |
| Pitch | in. [mm] | 0.75 [19.05] |
| Available Widths: Straight Run | in. [mm] | 12-48 [305-1219] |
| Available Widths: Curve/Spiral | in. [mm] | 12-48 [304.80-1219.20] |
| Link Height | in. [mm] | 0.44 [11.11] |
| Rod Diameter/Material | in. [mm] | 0.192 [5] Metal |
| Conveying Surface | in. [mm] | Belt Width -1.59 [-40] |
| Allowable Tension: Curve/Spiral | lb. [kg] | 150 [68] at 100,000 cycles |
| Allowable Tension: Straight Run | lb. [kg] | 300 [136] at 100,000 cycles |
| Turn Direction | Uni-directional (left or right-must specify direction) | |
| Mode of Turning | Inside edge collapses in turn | |
| Method of Drive | Sprockets driven on links |
Available Sprocket Options
Sprocket Reference
Select another sprocket size
Select a product
| Nom. Size | Display | Teeth | Pitch Diameter in (mm) | Hub Diameter in (mm) | Bore Min in (mm) | Bore Max in (mm) |
|---|---|---|---|---|---|---|
| 3 | #3-12 Hardened Steel | 12 | 2.9 (73.66) | 2.36 (59.94) | 1 (25.4) | 1.8 (45.72) |
| 3 | #3-12 Hardened Steel | 12 | 2.9 (73.66) | 2.36 (59.94) | 1 (25.4) | 1.8 (45.72) |
| 3 | #3-12 T303 | 12 | 2.9 (73.66) | 2.36 (59.94) | 1 (25.4) | 1.8 (45.72) |
| 3 | #3-12 T303 | 12 | 2.9 (73.66) | 2.36 (59.94) | 0.94 (23.81) | 1.8 (45.72) |
| 3 | #3-12 UHMW | 12 | 2.9 (73.66) | 2.25 (57.15) | 0 | 1.5 (38.1) |
| 3 | #3-16 UHMW | 16 | 3.84 (97.63) | 3 (76.2) | 1.58 (40.01) | 2.13 (54.1) |
| 3 | #3-16 UHMW | 16 | 3.84 (97.64) | 3 (76.2) | 1 (25.4) | 2.13 (54.1) |
| 4 | #4-17 T303 | 17 | 4.08 (103.68) | 3.58 (90.81) | 0 | 2.83 (71.88) |
| 4 | #4-17 UHMW | 17 | 4.08 (103.68) | 3.58 (90.81) | 0.75 (19.05) | 2.58 (65.53) |
| 4 | #4-17 UHMW | 17 | 4.08 (103.68) | 3.58 (90.81) | 1 (25.4) | 2.58 (65.53) |
| 4 | #4-18 T303 | 18 | 4.32 (109.68) | 3.82 (96.9) | 0 | 2.95 (74.93) |
| 4 | #4-18 T303 | 18 | 4.32 (109.68) | 3.82 (96.9) | 1.58 (40.01) | 2.82 (71.63) |
| 5 | #5-19 UHMW | 19 | 4.56 (115.75) | 4.06 (103.05) | 0.75 (19.05) | 2.94 (74.68) |
| 5 | #5-21 T303 | 21 | 5.03 (127.81) | 4.54 (115.27) | 1 (25.4) | 3.55 (90.17) |
| 5 | #5-21 UHMW | 21 | 5.03 (127.81) | 4.54 (115.27) | 1 (25.4) | 3.42 (86.87) |
| 5 | #5-21 UHMW FS | 21 | 4.79 (121.67) | 4.54 (115.32) | 1 (25.4) | 3.42 (86.87) |
| 6 | #6 UHMW FI | 0 | 0 | 6 (152.4) | 0.75 (19.05) | 4.64 (117.86) |
| 6 | #6 UHMW I | 0 | 0 | 6 (152.4) | 0.75 (19.05) | 4.64 (117.86) |
| 6 | #6-25 T303 | 25 | 5.98 (151.99) | 5.5 (139.67) | 0 | 4.39 (111.51) |
| 6 | #6-25 T303 | 25 | 5.98 (151.99) | 5.5 (139.67) | 0.5 (12.7) | 4.39 (111.51) |
| 6 | #6-25 UHMW | 25 | 5.98 (151.99) | 5.5 (139.67) | 0.88 (22.22) | 4.14 (105.16) |
| 6 | #6-26 T303 | 26 | 6.22 (158.04) | 5.73 (145.64) | 0 | 4.62 (117.35) |
| 6 | #6-26 T303 | 26 | 6.22 (158.04) | 5.73 (145.64) | 1.58 (40.01) | 4.62 (117.35) |
| 6 | #6-26 T303 | 26 | 6.22 (158.04) | 5.73 (145.64) | 1.58 (40.01) | 4.62 (117.35) |
| 6 | #6-26 UHMW | 26 | 6.22 (158.04) | 5.73 (145.64) | 1 (25.4) | 4.37 (111) |
| 6 | #6-27 UHMW | 27 | 6.42 (163.12) | 5.97 (151.61) | 0.88 (22.22) | 4.61 (117.09) |
| 8 | #8-34 UHMW | 34 | 8.13 (206.45) | 7.66 (194.46) | 1 (25.4) | 5.93 (150.62) |
Material Reference
- Acetal - polyoxymethylene plastic
- Celcon - acetal copolymer
- CI - cast iron
- Hardened Steel
- Nylon
- T303 - stainless steel
- T316 - stainless steel
- UMHW - polyethylene plastic
Options
Product Options
Omni-Tough Mesh Overlay
2½ times stronger than conventional
overlays and is resistant to product
sticking in freezer applications
Patented Pigtail Spirals
Reduces wear breakage
Integral Guard Edges
Available in 100/120/150, are more
durable and easier to clean than
modular guard edges
Patented Special Mesh Spirals
A cost effective solution for adding
lane dividers or flights
Does this meet your project needs?
Does this meet your project needs?
Does this meet your project needs?
Let’s get started!
Let’s get started!
Let’s get started!
Downloads
Downloads
Technical Bulletins
Installation, Assembly & Maintenance Instructions
Conveyor System Review Form
Illustrations
-
B18-12-17 OP100 IGE
-
B18-12-17 OP100
-
B24-8-16 OP150
-
B24-12-16 OP100 WOVEN LD
-
B24-12-17 OP100
-
B24-16-16 OP075
-
B30-12-17 OP100
-
B36-10-16 OP120
-
B36-12-16 OP100 IGE + FLIGHT
-
B36-12-16 OP100
-
B36-16-17 OP075
-
B48-12-17 OP100
-
B60-16-16 OP075
-
B72-12-17 OP100
-
U42-10-16 OP120
-
U48-10-16 OP120
-
U54-12-16 OP100 IGE
-
NO MESH OP100
-
OP075 B18 16 16
-
OP075 B18 16 17
-
OP075 B24 16 16
-
OP075 B24 16 17
-
OP075 B36 16 16
-
OP075 B36 16 17
-
OP075 B42 16 16
-
OP075 B42 16 17
-
OP075 B48 16 16
-
OP075 B48 16 17
-
OP075 B54 16 16
-
OP075 B54 16 17
-
OP075 B60 16 16
-
OP075 B60 16 17
-
OP075 B72 16 16
-
OP075 B72 16 17
-
OP075 ROD ONLY
-
OP100 B24 12 16
-
OP100 B24 12 17
-
OP100 B30 12 17
-
OP100 B36 12 17
-
OP100 B42 12 17
-
OP100 B48 12 16
-
OP100 B48 12 17
-
OP100 B54 12 16
-
OP100 B54 12 17
-
OP100 B60 12 16
-
OP100 B60 12 17
-
OP100 B72 12 16
-
OP100 NO MESH
-
OP100 U48 12 16
-
OP100 U54 12 16
-
OP100 U54 12 17
-
OP100 U60 12 17
-
OP120 B18 10 16
-
OP120 Rod Only
-
OP120 B18 10 17
-
OP120 B24 10 16
-
OP120 B30 10 16
-
OP120 B30 10 17
-
OP120 B36 10 16
-
OP120 B36 10 17
-
OP120 B48 10 16
-
OP120 B48 10 17
-
OP120 B54 10 16
-
OP120 U48 10 16
-
OP150 U54 8 17
-
OP150 B24 8 17
-
OP150 B30 8 17
-
OP150 B42 8 16
-
OP150 Rod Only
-
OP150 U36 8 16
-
OP150 U48 8 16
-
OP150 U54 8 16
-
OP150 U60 8 17
-
RROP100 B36 12 17
