Flat Wire Conveyor Belts

Ashworth began manufacturing flat wire conveyor belts in 1951, and they are still among the most versatile and most economical straight-running belts available.

Flat Wire Conveyor Belts

Select another product option

Features

Specifications

Options

Downloads

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWA1
Rod Diameter in. [mm] 0.106 [2.69]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1 By 1
Edge Treatment Clinched
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.07 [27.23]
Open Area 68%
Maximum Allowable Tension 350 [522]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-8 T303 8 2.81 (71.35) 2.2 (55.88) 0 1.64 (41.66)
4 #4-13 Celcon 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 3.04 (77.22)
4 #4-13 CI 13 4.47 (113.51) 3.97 (100.81) 0 3.1 (78.74)
4 #4-13 T303 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 T316 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 UHMW 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
6 #6-18 CI 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 T316 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 UHMW 18 6.19 (157.16) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 T316 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 UHMW 23 7.88 (200.02) 7.39 (187.63) 1 (25.4) 5.9 (149.86)
10 #10-28 UHMW 28 9.6 (243.87) 9.16 (232.77) 0 7.43 (188.72)
10 #10-31 CI 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 T316 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.53 (267.59) 10.16 (258.06) 1 (25.4) 8.42 (213.87)
12 #12-37 CI 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 A HUB 37 12.64 (321.08) 12.21 (310.13) 0 4.39 (111.51)
12 #12-37 UHMW 37 12.6 (319.91) 12.22 (310.39) 0.99 (25.02) 10.48 (266.19)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

13 through 31 tooth sprockets must have tooth height reduced to 3/8" (9.5 mm) for use with standard weight belts.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWA2
Rod Diameter in. [mm] 0.106 [2.69]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1 By 1
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.07 [27.23]
Open Area 68%
Maximum Allowable Tension 350 [522]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-8 T303 8 2.81 (71.35) 2.2 (55.88) 0 1.64 (41.66)
4 #4-13 Celcon 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 3.04 (77.22)
4 #4-13 CI 13 4.47 (113.51) 3.97 (100.81) 0 3.1 (78.74)
4 #4-13 T303 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 T316 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 UHMW 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
6 #6-18 CI 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 T316 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 UHMW 18 6.19 (157.16) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 T316 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 UHMW 23 7.88 (200.02) 7.39 (187.63) 1 (25.4) 5.9 (149.86)
10 #10-28 UHMW 28 9.6 (243.87) 9.16 (232.77) 0 7.43 (188.72)
10 #10-31 CI 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 T316 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.53 (267.59) 10.16 (258.06) 1 (25.4) 8.42 (213.87)
12 #12-37 CI 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 A HUB 37 12.64 (321.08) 12.21 (310.13) 0 4.39 (111.51)
12 #12-37 UHMW 37 12.6 (319.91) 12.22 (310.39) 0.99 (25.02) 10.48 (266.19)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

13 through 31 tooth sprockets must have tooth height reduced to 3/8" (9.5 mm) for use with standard weight belts.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWA3
Rod Diameter in. [mm] 0.106 [2.69]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1/2 By 1
Edge Treatment Clinched
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.07 [27.23]
Open Area 66%
Maximum Allowable Tension 500 [745]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-8 T303 8 2.81 (71.35) 2.2 (55.88) 0 1.64 (41.66)
4 #4-13 Celcon 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 3.04 (77.22)
4 #4-13 CI 13 4.47 (113.51) 3.97 (100.81) 0 3.1 (78.74)
4 #4-13 T303 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 T316 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 UHMW 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
6 #6-18 CI 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 T316 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 UHMW 18 6.19 (157.16) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 T316 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 UHMW 23 7.88 (200.02) 7.39 (187.63) 1 (25.4) 5.9 (149.86)
10 #10-28 UHMW 28 9.6 (243.87) 9.16 (232.77) 0 7.43 (188.72)
10 #10-31 CI 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 T316 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.53 (267.59) 10.16 (258.06) 1 (25.4) 8.42 (213.87)
12 #12-37 CI 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 A HUB 37 12.64 (321.08) 12.21 (310.13) 0 4.39 (111.51)
12 #12-37 UHMW 37 12.6 (319.91) 12.22 (310.39) 0.99 (25.02) 10.48 (266.19)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

13 through 31 tooth sprockets must have tooth height reduced to 3/8" (9.5 mm) for use with standard weight belts.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWA4
Rod Diameter in. [mm] 0.106 [2.69]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1/2 By 1
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.07 [27.23]
Open Area 66%
Maximum Allowable Tension 500 [745]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-8 T303 8 2.81 (71.35) 2.2 (55.88) 0 1.64 (41.66)
4 #4-13 Celcon 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 3.04 (77.22)
4 #4-13 CI 13 4.47 (113.51) 3.97 (100.81) 0 3.1 (78.74)
4 #4-13 T303 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 T316 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 UHMW 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
6 #6-18 CI 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 T316 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 UHMW 18 6.19 (157.16) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 T316 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 UHMW 23 7.88 (200.02) 7.39 (187.63) 1 (25.4) 5.9 (149.86)
10 #10-28 UHMW 28 9.6 (243.87) 9.16 (232.77) 0 7.43 (188.72)
10 #10-31 CI 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 T316 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.53 (267.59) 10.16 (258.06) 1 (25.4) 8.42 (213.87)
12 #12-37 CI 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 A HUB 37 12.64 (321.08) 12.21 (310.13) 0 4.39 (111.51)
12 #12-37 UHMW 37 12.6 (319.91) 12.22 (310.39) 0.99 (25.02) 10.48 (266.19)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

13 through 31 tooth sprockets must have tooth height reduced to 3/8" (9.5 mm) for use with standard weight belts.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWA5
Rod Diameter in. [mm] 0.106 [2.69]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1/2 By 1/2
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 0.54 [13.77]
Open Area
Maximum Allowable Tension 500 [745]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-17 T303 17 2.95 (74.93) 2.53 (64.34) 0 0
4 #4-22 Celcon 22 3.81 (96.77) 3.4 (86.26) 1 (25.4) 2.65 (67.31)
4 #4-22 CI DT 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 T303 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 T303 DT 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 T316 DT 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 UHMW 22 3.81 (96.77) 3.4 (86.26) 0.75 (19.05) 2.41 (61.21)
4 #4-22 UHMW 22 3.81 (96.77) 3.4 (86.26) 1 (25.4) 2.41 (61.21)
6 #6-38 Celcon 38 6.57 (166.78) 6.17 (156.69) 1 (25.4) 4.94 (125.48)
6 #6-38 CI DT 38 6.56 (166.7) 6.17 (156.69) 0 4.94 (125.48)
6 #6-38 T303 DT 38 6.56 (166.7) 6.17 (156.69) 0 4.94 (125.48)
6 #6-38 T316 DT 38 6.56 (166.7) 6.17 (156.69) 0 4.94 (125.48)
6 #6-38 UHMW 38 6.57 (166.78) 6.17 (156.69) 1 (25.4) 4.81 (122.17)
6 #6-38 UHMW DT 38 6.57 (166.88) 6.17 (156.72) 0 4.81 (122.17)
8 #8-46 CI DT 46 7.94 (201.73) 7.55 (191.74) 0 6.07 (154.18)
8 #8-46 T303 DT 46 7.94 (201.73) 7.55 (191.74) 0 6.07 (154.18)
8 #8-46 T316 DT 46 7.94 (201.73) 7.55 (191.74) 0 6.07 (154.18)
8 #8-46 UHMW 46 7.95 (201.8) 7.55 (191.77) 0 5.82 (147.83)
10 #10-62 CI DT 62 10.7 (271.88) 10.31 (262) 0 8.83 (224.28)
10 #10-62 T303 DT 62 10.7 (271.88) 10.31 (262) 0 8.83 (224.28)
10 #10-62 T316 DT 62 10.7 (271.88) 10.31 (262) 0 8.83 (224.28)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWA5SC
Rod Diameter in. [mm] 0.106 [2.69]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1/2 By 1/2
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 0.54 [13.77]
Open Area
Maximum Allowable Tension 500 [745]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-17 T303 17 2.95 (74.93) 2.53 (64.34) 0 0
4 #4-22 Celcon 22 3.81 (96.77) 3.4 (86.26) 1 (25.4) 2.65 (67.31)
4 #4-22 CI DT 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 T303 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 T303 DT 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 T316 DT 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 UHMW 22 3.81 (96.77) 3.4 (86.26) 0.75 (19.05) 2.41 (61.21)
4 #4-22 UHMW 22 3.81 (96.77) 3.4 (86.26) 1 (25.4) 2.41 (61.21)
6 #6-38 Celcon 38 6.57 (166.78) 6.17 (156.69) 1 (25.4) 4.94 (125.48)
6 #6-38 CI DT 38 6.56 (166.7) 6.17 (156.69) 0 4.94 (125.48)
6 #6-38 T303 DT 38 6.56 (166.7) 6.17 (156.69) 0 4.94 (125.48)
6 #6-38 T316 DT 38 6.56 (166.7) 6.17 (156.69) 0 4.94 (125.48)
6 #6-38 UHMW 38 6.57 (166.78) 6.17 (156.69) 1 (25.4) 4.81 (122.17)
6 #6-38 UHMW DT 38 6.57 (166.88) 6.17 (156.72) 0 4.81 (122.17)
8 #8-46 CI DT 46 7.94 (201.73) 7.55 (191.74) 0 6.07 (154.18)
8 #8-46 T303 DT 46 7.94 (201.73) 7.55 (191.74) 0 6.07 (154.18)
8 #8-46 T316 DT 46 7.94 (201.73) 7.55 (191.74) 0 6.07 (154.18)
8 #8-46 UHMW 46 7.95 (201.8) 7.55 (191.77) 0 5.82 (147.83)
10 #10-62 CI DT 62 10.7 (271.88) 10.31 (262) 0 8.83 (224.28)
10 #10-62 T303 DT 62 10.7 (271.88) 10.31 (262) 0 8.83 (224.28)
10 #10-62 T316 DT 62 10.7 (271.88) 10.31 (262) 0 8.83 (224.28)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWB1
Rod Diameter in. [mm] 0.120 [3.05]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1 By 1
Edge Treatment Clinched
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.07 [27.23]
Open Area 68%
Maximum Allowable Tension 420 [626]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-8 T303 8 2.81 (71.35) 2.2 (55.88) 0 1.64 (41.66)
4 #4-13 Celcon 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 3.04 (77.22)
4 #4-13 CI 13 4.47 (113.51) 3.97 (100.81) 0 3.1 (78.74)
4 #4-13 T303 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 T316 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 UHMW 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
6 #6-18 CI 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 T316 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 UHMW 18 6.19 (157.16) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 T316 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 UHMW 23 7.88 (200.02) 7.39 (187.63) 1 (25.4) 5.9 (149.86)
10 #10-28 UHMW 28 9.6 (243.87) 9.16 (232.77) 0 7.43 (188.72)
10 #10-31 CI 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 T316 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.53 (267.59) 10.16 (258.06) 1 (25.4) 8.42 (213.87)
12 #12-37 CI 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 A HUB 37 12.64 (321.08) 12.21 (310.13) 0 4.39 (111.51)
12 #12-37 UHMW 37 12.6 (319.91) 12.22 (310.39) 0.99 (25.02) 10.48 (266.19)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

13 through 31 tooth sprockets must have tooth height reduced to 3/8" (9.5 mm) for use with standard weight belts.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWB2
Rod Diameter in. [mm] 0.120 [3.05]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1 By 1
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.07 [27.23]
Open Area 68%
Maximum Allowable Tension 420 [626]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWB3
Rod Diameter in. [mm] 0.120 [3.05]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1/2 By 1
Edge Treatment Clinched
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.07 [27.23]
Open Area 66%
Maximum Allowable Tension 600 [894]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-8 T303 8 2.81 (71.35) 2.2 (55.88) 0 1.64 (41.66)
4 #4-13 Celcon 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 3.04 (77.22)
4 #4-13 CI 13 4.47 (113.51) 3.97 (100.81) 0 3.1 (78.74)
4 #4-13 T303 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 T316 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 UHMW 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
6 #6-18 CI 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 T316 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 UHMW 18 6.19 (157.16) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 T316 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 UHMW 23 7.88 (200.02) 7.39 (187.63) 1 (25.4) 5.9 (149.86)
10 #10-28 UHMW 28 9.6 (243.87) 9.16 (232.77) 0 7.43 (188.72)
10 #10-31 CI 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 T316 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.53 (267.59) 10.16 (258.06) 1 (25.4) 8.42 (213.87)
12 #12-37 CI 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 A HUB 37 12.64 (321.08) 12.21 (310.13) 0 4.39 (111.51)
12 #12-37 UHMW 37 12.6 (319.91) 12.22 (310.39) 0.99 (25.02) 10.48 (266.19)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

13 through 31 tooth sprockets must have tooth height reduced to 3/8" (9.5 mm) for use with standard weight belts.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWB4
Rod Diameter in. [mm] 0.120 [3.05]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1/2 By 1
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.07 [27.23]
Open Area 66%
Maximum Allowable Tension 600 [894]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-8 T303 8 2.81 (71.35) 2.2 (55.88) 0 1.64 (41.66)
4 #4-13 Celcon 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 3.04 (77.22)
4 #4-13 CI 13 4.47 (113.51) 3.97 (100.81) 0 3.1 (78.74)
4 #4-13 T303 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 T316 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 UHMW 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
6 #6-18 CI 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 T316 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 UHMW 18 6.19 (157.16) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 T316 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 UHMW 23 7.88 (200.02) 7.39 (187.63) 1 (25.4) 5.9 (149.86)
10 #10-28 UHMW 28 9.6 (243.87) 9.16 (232.77) 0 7.43 (188.72)
10 #10-31 CI 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 T316 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.53 (267.59) 10.16 (258.06) 1 (25.4) 8.42 (213.87)
12 #12-37 CI 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 A HUB 37 12.64 (321.08) 12.21 (310.13) 0 4.39 (111.51)
12 #12-37 UHMW 37 12.6 (319.91) 12.22 (310.39) 0.99 (25.02) 10.48 (266.19)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

13 through 31 tooth sprockets must have tooth height reduced to 3/8" (9.5 mm) for use with standard weight belts.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWB5
Rod Diameter in. [mm] 0.120 [3.05]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1/2 By 1/2
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 0.54 [13.77]
Open Area
Maximum Allowable Tension 600 [894]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-17 T303 17 2.95 (74.93) 2.53 (64.34) 0 0
4 #4-22 Celcon 22 3.81 (96.77) 3.4 (86.26) 1 (25.4) 2.65 (67.31)
4 #4-22 CI DT 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 T303 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 T303 DT 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 T316 DT 22 3.81 (96.72) 3.39 (86.13) 0 2.65 (67.31)
4 #4-22 UHMW 22 3.81 (96.77) 3.4 (86.26) 0.75 (19.05) 2.41 (61.21)
4 #4-22 UHMW 22 3.81 (96.77) 3.4 (86.26) 1 (25.4) 2.41 (61.21)
6 #6-38 Celcon 38 6.57 (166.78) 6.17 (156.69) 1 (25.4) 4.94 (125.48)
6 #6-38 CI DT 38 6.56 (166.7) 6.17 (156.69) 0 4.94 (125.48)
6 #6-38 T303 DT 38 6.56 (166.7) 6.17 (156.69) 0 4.94 (125.48)
6 #6-38 T316 DT 38 6.56 (166.7) 6.17 (156.69) 0 4.94 (125.48)
6 #6-38 UHMW 38 6.57 (166.78) 6.17 (156.69) 1 (25.4) 4.81 (122.17)
6 #6-38 UHMW DT 38 6.57 (166.88) 6.17 (156.72) 0 4.81 (122.17)
8 #8-46 CI DT 46 7.94 (201.73) 7.55 (191.74) 0 6.07 (154.18)
8 #8-46 T303 DT 46 7.94 (201.73) 7.55 (191.74) 0 6.07 (154.18)
8 #8-46 T316 DT 46 7.94 (201.73) 7.55 (191.74) 0 6.07 (154.18)
8 #8-46 UHMW 46 7.95 (201.8) 7.55 (191.77) 0 5.82 (147.83)
10 #10-62 CI DT 62 10.7 (271.88) 10.31 (262) 0 8.83 (224.28)
10 #10-62 T303 DT 62 10.7 (271.88) 10.31 (262) 0 8.83 (224.28)
10 #10-62 T316 DT 62 10.7 (271.88) 10.31 (262) 0 8.83 (224.28)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWC1
Rod Diameter in. [mm] 0.192 [4.88]
Picket Dimension 0.5 x 0.062 [12.7 x 1.6]
Nominal Mesh Opening in. 1 By 1
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.08 [27.53]
Open Area 68%
Maximum Allowable Tension 1350 [2012]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-9 Hardened Steel 9 0 2.45 (62.23) 1 (25.4) 1.83 (46.48)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1.25 (31.75) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 0.94 (23.81) 1.84 (46.74)
3 #3-9 T316 9 3.16 (80.26) 2.46 (62.48) 1.44 (36.51) 1.84 (46.74)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 1 (25.4) 1.72 (43.69)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 0 1.72 (43.69)
4 #4 UHMW FI 0 0 3.92 (99.57) 0.75 (19.05) 2.93 (74.42)
4 #4 UHMW I 0 0 3.92 (99.57) 0 2.93 (74.42)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.07 (52.58)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.44 (61.98)
4 #4-12 T303 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 T316 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 UHMW 12 4.17 (105.97) 3.45 (87.63) 0.75 (19.05) 2.46 (62.48)
4 #4-13 Celcon 13 4.4 (111.76) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
4 #4-13 CI 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 T316 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 UHMW 13 4.53 (115.06) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
5 #5-15 T303 15 5.2 (131.95) 4.58 (116.36) 0 3.59 (91.19)
5 #5-15 UHMW 15 5.2 (131.95) 4.58 (116.36) 2 (50.8) 3.46 (87.88)
6 #6 UHMW FI 0 0 5.65 (143.51) 0.75 (19.05) 4.29 (108.97)
6 #6 UHMW I 0 0 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 CI 18 6.24 (158.5) 5.66 (143.67) 0 3.75 (95.25)
6 #6-18 Nylon 18 6.24 (158.5) 5.65 (143.51) 1 (25.4) 4.54 (115.32)
6 #6-18 T316 18 6.24 (158.5) 5.66 (143.67) 1 (25.4) 3.75 (95.25)
6 #6-18 UHMW 18 6.24 (158.5) 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 UHMW FS 18 6.15 (156.16) 5.65 (143.46) 0 4.29 (108.97)
6 #6-18 UHMW Product Release 18 6.4 (162.51) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
6 #6-18 UHMW Split 18 6.24 (158.5) 5.65 (143.46) 0 4.29 (108.97)
6 #6-19 T303 19 6.55 (166.47) 6.03 (153.21) 0 4.8 (121.92)
6 #6-19 UHMW 19 6.55 (166.47) 6.03 (153.21) 1.18 (30) 4.67 (118.62)
8 #8 UHMW FI 0 0 7.38 (187.45) 0.75 (19.05) 5.89 (149.61)
8 #8 UHMW I 0 0 7.38 (187.45) 0 5.89 (149.61)
8 #8-23 CI 23 7.41 (188.11) 7.41 (188.11) 0 5.9 (149.86)
8 #8-23 CI 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.97 (202.41) 7.41 (188.12) 1 (25.4) 4.75 (120.65)
8 #8-23 UHMW 23 7.96 (202.18) 7.39 (187.71) 1 (25.4) 5.9 (149.86)
8 #8-23 UHMW Split 23 7.89 (200.33) 7.39 (187.63) 0 5.9 (149.86)
10 #10-31 CI 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 T316 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.66 (270.76) 10.16 (258.06) 0.99 (25.02) 8.42 (213.87)
12 #12-37 UHMW 37 12.74 (323.49) 12.24 (310.79) 0.99 (25.02) 10.49 (266.45)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWC1C
Rod Diameter in. [mm] 0.192 [4.88]
Picket Dimension 0.5 x 0.062 [12.7 x 1.6]
Nominal Mesh Opening in. 1 By 1
Edge Treatment Clinched
Available Widths in. [mm] 24-96 [610-2438.40]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.08 [27.53]
Open Area 68%
Maximum Allowable Tension 1350 [2012]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-9 Hardened Steel 9 0 2.45 (62.23) 1 (25.4) 1.83 (46.48)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1.25 (31.75) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 0.94 (23.81) 1.84 (46.74)
3 #3-9 T316 9 3.16 (80.26) 2.46 (62.48) 1.44 (36.51) 1.84 (46.74)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 1 (25.4) 1.72 (43.69)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 0 1.72 (43.69)
4 #4 UHMW FI 0 0 3.92 (99.57) 0.75 (19.05) 2.93 (74.42)
4 #4 UHMW I 0 0 3.92 (99.57) 0 2.93 (74.42)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.07 (52.58)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.44 (61.98)
4 #4-12 T303 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 T316 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 UHMW 12 4.17 (105.97) 3.45 (87.63) 0.75 (19.05) 2.46 (62.48)
4 #4-13 Celcon 13 4.4 (111.76) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
4 #4-13 CI 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 T316 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 UHMW 13 4.53 (115.06) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
5 #5-15 T303 15 5.2 (131.95) 4.58 (116.36) 0 3.59 (91.19)
5 #5-15 UHMW 15 5.2 (131.95) 4.58 (116.36) 2 (50.8) 3.46 (87.88)
6 #6 UHMW FI 0 0 5.65 (143.51) 0.75 (19.05) 4.29 (108.97)
6 #6 UHMW I 0 0 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 CI 18 6.24 (158.5) 5.66 (143.67) 0 3.75 (95.25)
6 #6-18 Nylon 18 6.24 (158.5) 5.65 (143.51) 1 (25.4) 4.54 (115.32)
6 #6-18 T316 18 6.24 (158.5) 5.66 (143.67) 1 (25.4) 3.75 (95.25)
6 #6-18 UHMW 18 6.24 (158.5) 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 UHMW FS 18 6.15 (156.16) 5.65 (143.46) 0 4.29 (108.97)
6 #6-18 UHMW Product Release 18 6.4 (162.51) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
6 #6-18 UHMW Split 18 6.24 (158.5) 5.65 (143.46) 0 4.29 (108.97)
6 #6-19 T303 19 6.55 (166.47) 6.03 (153.21) 0 4.8 (121.92)
6 #6-19 UHMW 19 6.55 (166.47) 6.03 (153.21) 1.18 (30) 4.67 (118.62)
8 #8 UHMW FI 0 0 7.38 (187.45) 0.75 (19.05) 5.89 (149.61)
8 #8 UHMW I 0 0 7.38 (187.45) 0 5.89 (149.61)
8 #8-23 CI 23 7.41 (188.11) 7.41 (188.11) 0 5.9 (149.86)
8 #8-23 CI 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.97 (202.41) 7.41 (188.12) 1 (25.4) 4.75 (120.65)
8 #8-23 UHMW 23 7.96 (202.18) 7.39 (187.71) 1 (25.4) 5.9 (149.86)
8 #8-23 UHMW Split 23 7.89 (200.33) 7.39 (187.63) 0 5.9 (149.86)
10 #10-31 CI 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 T316 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.66 (270.76) 10.16 (258.06) 0.99 (25.02) 8.42 (213.87)
12 #12-37 UHMW 37 12.74 (323.49) 12.24 (310.79) 0.99 (25.02) 10.49 (266.45)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWC2
Rod Diameter in. [mm] 0.192 [4.88]
Picket Dimension 0.5 x 0.062 [12.7 x 1.6]
Nominal Mesh Opening in. 1/2 By 1
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.08 [27.53]
Open Area 66%
Maximum Allowable Tension 1750 [2608]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-9 Hardened Steel 9 0 2.45 (62.23) 1 (25.4) 1.83 (46.48)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1.25 (31.75) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 0.94 (23.81) 1.84 (46.74)
3 #3-9 T316 9 3.16 (80.26) 2.46 (62.48) 1.44 (36.51) 1.84 (46.74)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 1 (25.4) 1.72 (43.69)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 0 1.72 (43.69)
4 #4 UHMW FI 0 0 3.92 (99.57) 0.75 (19.05) 2.93 (74.42)
4 #4 UHMW I 0 0 3.92 (99.57) 0 2.93 (74.42)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.07 (52.58)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.44 (61.98)
4 #4-12 T303 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 T316 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 UHMW 12 4.17 (105.97) 3.45 (87.63) 0.75 (19.05) 2.46 (62.48)
4 #4-13 Celcon 13 4.4 (111.76) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
4 #4-13 CI 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 T316 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 UHMW 13 4.53 (115.06) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
5 #5-15 T303 15 5.2 (131.95) 4.58 (116.36) 0 3.59 (91.19)
5 #5-15 UHMW 15 5.2 (131.95) 4.58 (116.36) 2 (50.8) 3.46 (87.88)
6 #6 UHMW FI 0 0 5.65 (143.51) 0.75 (19.05) 4.29 (108.97)
6 #6 UHMW I 0 0 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 CI 18 6.24 (158.5) 5.66 (143.67) 0 3.75 (95.25)
6 #6-18 Nylon 18 6.24 (158.5) 5.65 (143.51) 1 (25.4) 4.54 (115.32)
6 #6-18 T316 18 6.24 (158.5) 5.66 (143.67) 1 (25.4) 3.75 (95.25)
6 #6-18 UHMW 18 6.24 (158.5) 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 UHMW FS 18 6.15 (156.16) 5.65 (143.46) 0 4.29 (108.97)
6 #6-18 UHMW Product Release 18 6.4 (162.51) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
6 #6-18 UHMW Split 18 6.24 (158.5) 5.65 (143.46) 0 4.29 (108.97)
6 #6-19 T303 19 6.55 (166.47) 6.03 (153.21) 0 4.8 (121.92)
6 #6-19 UHMW 19 6.55 (166.47) 6.03 (153.21) 1.18 (30) 4.67 (118.62)
8 #8 UHMW FI 0 0 7.38 (187.45) 0.75 (19.05) 5.89 (149.61)
8 #8 UHMW I 0 0 7.38 (187.45) 0 5.89 (149.61)
8 #8-23 CI 23 7.41 (188.11) 7.41 (188.11) 0 5.9 (149.86)
8 #8-23 CI 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.97 (202.41) 7.41 (188.12) 1 (25.4) 4.75 (120.65)
8 #8-23 UHMW 23 7.96 (202.18) 7.39 (187.71) 1 (25.4) 5.9 (149.86)
8 #8-23 UHMW Split 23 7.89 (200.33) 7.39 (187.63) 0 5.9 (149.86)
10 #10-31 CI 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 T316 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.66 (270.76) 10.16 (258.06) 0.99 (25.02) 8.42 (213.87)
12 #12-37 UHMW 37 12.74 (323.49) 12.24 (310.79) 0.99 (25.02) 10.49 (266.45)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWC2C
Rod Diameter in. [mm] 0.192 [4.88]
Picket Dimension 0.5 x 0.062 [12.7 x 1.6]
Nominal Mesh Opening in. 1/2 By 1
Edge Treatment Clinched
Available Widths in. [mm] 24-96 [610-2438.40]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.08 [27.53]
Open Area 66%
Maximum Allowable Tension 1750 [2608]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-9 Hardened Steel 9 0 2.45 (62.23) 1 (25.4) 1.83 (46.48)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1.25 (31.75) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 0.94 (23.81) 1.84 (46.74)
3 #3-9 T316 9 3.16 (80.26) 2.46 (62.48) 1.44 (36.51) 1.84 (46.74)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 1 (25.4) 1.72 (43.69)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 0 1.72 (43.69)
4 #4 UHMW FI 0 0 3.92 (99.57) 0.75 (19.05) 2.93 (74.42)
4 #4 UHMW I 0 0 3.92 (99.57) 0 2.93 (74.42)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.07 (52.58)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.44 (61.98)
4 #4-12 T303 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 T316 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 UHMW 12 4.17 (105.97) 3.45 (87.63) 0.75 (19.05) 2.46 (62.48)
4 #4-13 Celcon 13 4.4 (111.76) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
4 #4-13 CI 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 T316 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 UHMW 13 4.53 (115.06) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
5 #5-15 T303 15 5.2 (131.95) 4.58 (116.36) 0 3.59 (91.19)
5 #5-15 UHMW 15 5.2 (131.95) 4.58 (116.36) 2 (50.8) 3.46 (87.88)
6 #6 UHMW FI 0 0 5.65 (143.51) 0.75 (19.05) 4.29 (108.97)
6 #6 UHMW I 0 0 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 CI 18 6.24 (158.5) 5.66 (143.67) 0 3.75 (95.25)
6 #6-18 Nylon 18 6.24 (158.5) 5.65 (143.51) 1 (25.4) 4.54 (115.32)
6 #6-18 T316 18 6.24 (158.5) 5.66 (143.67) 1 (25.4) 3.75 (95.25)
6 #6-18 UHMW 18 6.24 (158.5) 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 UHMW FS 18 6.15 (156.16) 5.65 (143.46) 0 4.29 (108.97)
6 #6-18 UHMW Product Release 18 6.4 (162.51) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
6 #6-18 UHMW Split 18 6.24 (158.5) 5.65 (143.46) 0 4.29 (108.97)
6 #6-19 T303 19 6.55 (166.47) 6.03 (153.21) 0 4.8 (121.92)
6 #6-19 UHMW 19 6.55 (166.47) 6.03 (153.21) 1.18 (30) 4.67 (118.62)
8 #8 UHMW FI 0 0 7.38 (187.45) 0.75 (19.05) 5.89 (149.61)
8 #8 UHMW I 0 0 7.38 (187.45) 0 5.89 (149.61)
8 #8-23 CI 23 7.41 (188.11) 7.41 (188.11) 0 5.9 (149.86)
8 #8-23 CI 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.97 (202.41) 7.41 (188.12) 1 (25.4) 4.75 (120.65)
8 #8-23 UHMW 23 7.96 (202.18) 7.39 (187.71) 1 (25.4) 5.9 (149.86)
8 #8-23 UHMW Split 23 7.89 (200.33) 7.39 (187.63) 0 5.9 (149.86)
10 #10-31 CI 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 T316 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.66 (270.76) 10.16 (258.06) 0.99 (25.02) 8.42 (213.87)
12 #12-37 UHMW 37 12.74 (323.49) 12.24 (310.79) 0.99 (25.02) 10.49 (266.45)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWC6
Rod Diameter in. [mm] 0.192 [4.88]
Picket Dimension 0.5 x 0.062 [12.7 x 1.6]
Nominal Mesh Opening in. 1/2 By 1/2 Modified
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.08 [27.53]
Open Area
Maximum Allowable Tension 1700 [2533]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-9 Hardened Steel 9 0 2.45 (62.23) 0 1.83 (46.48)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1 (25.4) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 1.25 (31.75) 1.84 (46.74)
3 #3-9 T303 9 3.16 (80.26) 2.46 (62.48) 0.94 (23.81) 1.84 (46.74)
3 #3-9 T316 9 3.16 (80.26) 2.46 (62.48) 1.44 (36.51) 1.84 (46.74)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 1 (25.4) 1.72 (43.69)
3 #3-9 UHMW 9 3.16 (80.26) 2.53 (64.26) 0 1.72 (43.69)
4 #4 UHMW FI 0 0 3.92 (99.57) 0.75 (19.05) 2.93 (74.42)
4 #4 UHMW I 0 0 3.92 (99.57) 0 2.93 (74.42)
4 #4-11 T303 11 3.83 (97.36) 3.18 (80.72) 0 2.44 (61.98)
4 #4-12 T303 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 T316 12 4.17 (105.97) 3.54 (89.92) 0 2.8 (71.12)
4 #4-12 UHMW 12 4.17 (105.97) 3.45 (87.63) 0.75 (19.05) 2.46 (62.48)
4 #4-13 Celcon 13 4.4 (111.76) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
4 #4-13 CI 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 T316 13 4.53 (115.09) 3.91 (99.22) 0 3.04 (77.22)
4 #4-13 UHMW 13 4.53 (115.06) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
5 #5-15 T303 15 5.08 (129.06) 4.58 (116.36) 0 3.59 (91.19)
5 #5-15 UHMW 15 5.08 (129.06) 4.58 (116.36) 2 (50.8) 3.46 (87.88)
6 #6 UHMW FI 0 0 5.65 (143.51) 0.75 (19.05) 4.29 (108.97)
6 #6 UHMW I 0 0 5.65 (143.51) 0.75 (19.05) 4.29 (108.97)
6 #6-18 CI 18 6.24 (158.5) 5.66 (143.67) 0 3.75 (95.25)
6 #6-18 Nylon 18 6.24 (158.5) 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 T316 18 6.24 (158.5) 5.66 (143.67) 1 (25.4) 3.75 (95.25)
6 #6-18 UHMW 18 6.24 (158.5) 5.65 (143.51) 0 4.29 (108.97)
6 #6-18 UHMW FS 18 6.15 (156.16) 5.65 (143.46) 0 4.29 (108.97)
6 #6-18 UHMW Split 18 6.24 (158.5) 5.65 (143.46) 0 4.29 (108.97)
6 #6-19 T303 19 6.55 (166.47) 6.03 (153.21) 1.18 (30) 4.8 (121.92)
6 #6-19 UHMW 19 6.55 (166.47) 6.03 (153.21) 1.18 (30) 4.67 (118.62)
8 #8 UHMW FI 0 0 7.38 (187.45) 0.75 (19.05) 5.89 (149.61)
8 #8 UHMW I 0 0 7.38 (187.45) 0 5.89 (149.61)
8 #8-23 CI 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.96 (202.18) 7.41 (188.12) 0 4.75 (120.65)
8 #8-23 T316 23 7.97 (202.41) 7.41 (188.12) 1 (25.4) 4.75 (120.65)
8 #8-23 UHMW 23 7.96 (202.18) 7.39 (187.71) 0 5.9 (149.86)
8 #8-23 UHMW Split 23 7.89 (200.33) 7.39 (187.63) 0 5.9 (149.86)
10 #10-31 CI 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 T316 31 10.72 (272.29) 10.16 (258.06) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.66 (270.76) 10.16 (258.06) 1 (25.4) 8.42 (213.87)
12 #12-37 UHMW 37 12.74 (323.49) 12.24 (310.79) 0 10.49 (266.45)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWC6SB
Rod Diameter in. [mm] 0.192 [4.88]
Picket Dimension 0.5 x 0.062 [12.7 x 1.6]
Nominal Mesh Opening in. 1/2 By 1/2 Modified
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.08 [27.53]
Open Area
Maximum Allowable Tension 1700 [2533]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Features

These belts are engineered and manufactured to strict tolerances resulting in a longer belt life.

Features and Benefits

Efficient Performance

  • Maximum open area minimizes spray deflection
  • Versatile to suit most applications: standard weight and heavy duty variants are available

Proven Reliability

  • Precision manufactured using the industry's tightest tolerances for increased belt life and smooth operation
  • Over 75 years of customer satisfaction

DIRECTION

straight run

STRAIGHT RUN

APPLICATIONS

freezer

FREEZER

proofer

SMOKER

cooler

COOLER

cooker

COOKER

Dryer

DRYER

fryer

FRYER

proofer

PROOFER

blancher

BLANCHER

pasteurizing

PASTEURIZING

grading

GRADING

transfer

TRANSFER

packaging

PACKAGING

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Specifications

Technical Specifications

Select another product option

Technical Specifications Units FWB2 (1)
Rod Diameter in. [mm] 0.120 [3.05]
Picket Dimension 0.375 x 0.046 [9.5 x 1.2]
Nominal Mesh Opening in. 1 By 1
Edge Treatment Welded
Available Widths in. [mm] 4.5-208 [114-5283.20]
Conveying Surface Belt width -0
Longitudinal Pitch in. [mm] 1.07 [27.23]
Open Area 68%
Maximum Allowable Tension 420 [626]
Method of Drive Positively driven with matching sprockets or friction driven with a flat faced drum

Available Sprocket Options

Sprocket Reference

Sprocket spec description diagram

Select another sprocket size

Select a product

Nom. Size Display Teeth Pitch Diameter in (mm) Hub Diameter in (mm) Bore Min in (mm) Bore Max in (mm)
3 #3-8 T303 8 2.81 (71.35) 2.2 (55.88) 0 1.64 (41.66)
4 #4-13 Celcon 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 3.04 (77.22)
4 #4-13 CI 13 4.47 (113.51) 3.97 (100.81) 0 3.1 (78.74)
4 #4-13 T303 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 T316 13 4.48 (113.77) 3.97 (100.84) 0 3.11 (78.99)
4 #4-13 UHMW 13 4.48 (113.77) 3.9 (99.06) 1 (25.4) 2.91 (73.91)
6 #6-18 CI 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 T316 18 6.19 (157.16) 5.69 (144.46) 0 3.75 (95.25)
6 #6-18 UHMW 18 6.19 (157.16) 5.65 (143.46) 1 (25.4) 4.29 (108.97)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 CI 23 7.88 (200.02) 7.44 (188.93) 0 5.96 (151.38)
8 #8-23 T316 23 7.88 (200.02) 7.44 (188.91) 0 4.75 (120.65)
8 #8-23 UHMW 23 7.88 (200.02) 7.39 (187.63) 1 (25.4) 5.9 (149.86)
10 #10-28 UHMW 28 9.6 (243.87) 9.16 (232.77) 0 7.43 (188.72)
10 #10-31 CI 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.6 (269.14) 10.16 (257.96) 0 8.67 (220.22)
10 #10-31 T303 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 T316 31 10.59 (269.08) 10.16 (257.97) 0 8.67 (220.22)
10 #10-31 UHMW 31 10.53 (267.59) 10.16 (258.06) 1 (25.4) 8.42 (213.87)
12 #12-37 CI 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 37 12.64 (321.06) 12.21 (310.13) 0 10.72 (272.29)
12 #12-37 T316 A HUB 37 12.64 (321.08) 12.21 (310.13) 0 4.39 (111.51)
12 #12-37 UHMW 37 12.6 (319.91) 12.22 (310.39) 0.99 (25.02) 10.48 (266.19)

UHMWPE material type components have a 150° F (66°C) maximum operation temperature.

13 through 31 tooth sprockets must have tooth height reduced to 3/8" (9.5 mm) for use with standard weight belts.

Maximum bore sized listed for UHMWPE material is based on 1/2 inch (12.7 mm) of material above keyway.

Material Reference

  • Acetal - polyoxymethylene plastic
  • Celcon - acetal copolymer
  • CI - cast iron
  • Hardened Steel
  • Nylon
  • T303 - stainless steel
  • T316 - stainless steel
  • UMHW - polyethylene plastic

Need more detailed information?

Need more detailed information?

Need more detailed information?

Belt Calculator

No Results

Base Belt Weight

Loop Count

Outer Loop Count

Inner Loop Count

Openings

Inner Openings

Outer Openings

Opening Size

Open Area

Belt Pitch

Turn Ratio

Strength Straight

Strength Turn

Rod Size

Edge Finish

Need more detailed information?

Need more detailed information?

Need more detailed information?

Options

Product Options

Ashworth Flat Wire Conveyor Belt Pinup Attachments Diagram

Pin-up Attachments

Pin-up attachments are flat wire strips that lift the product from the belt surface to prevent undesirable marking. They can also be used to keep the product from sliding on inclines or declines.

Limits for Use:

  • Maximum height above belt surface is 0.38" (9.5 mm)
  • Belt must be supported so that the pinup can pass through the return path
Ashworth Flat Wire Conveyor Belt Lift Diagram

Lifts

Lift attachments keep the product from sliding on inclines or declines. The formed angle lift uses a flight clip to fasten it to the belt. The flat bar lift is welded to the belt.

Limits for Use:

  • Maximum Lift Width: Belt Width: - 0.5" (12.7 mm)

  • Lift Thickness: Normal limits are no greater than 0.18" (4.8 mm) or smaller than 0.06" (1.52 mm)

  • Lift Height: Check with Engineering if greater than 6" (152 mm)

  • Minimum Lift Spacing: 2" (50.8 mm)

  • Belt must be supported so that the lift can pass through the return path

Ashworth Flat Wire Conveyor Belt Beveled Edge

Beveled Edges

Beveling the edge of the flat wire pickets facilitates product transfer by eliminating or reducing tippage of sharp edge cans or bottles. This option offers advantages on all transfer operations where the terminal roll or sprocket diameter is smaller than 10" (254 mm).

Does this meet your project needs?

Does this meet your project needs?

Does this meet your project needs?

Let’s get started!

Let’s get started!

Let’s get started!

Related Products

Cleatrac® Belt and Sprocket System

Accurately transfer small products, minimize product damage, and keep your manufacturing process up and running

Positive Drive Chain Edge (PDCE)

An alternative to Lotension drive systems for applications where product movement or oil is a problem.

Eye-Link Belts

Versatile steel conveyor belts that can be designed and manufactured to satisfy the most demanding of applications.

S-Belt

Fine mesh options provide exceptional support for gelatin dryers.

Ashworth Brothers Instagram

Ashworth Brothers Vimeo